
Custom CNC Turned and Milled Polycarbonate (PC) Parts
Overview
Transparent connectors with anti-rotation flats, locating slots and radial interfaces combine cylindrical surfaces with lateral features. XCM CNC provides PC turning and milling: turning produces outside diameters and end faces, followed by milling of flats and locating slots and drilling of side holes, bringing mating surfaces and orientation features into the same part. Polycarbonate (PC) combines transparency and impact resistance, with suitability depending on the grade and operating environment. The minimum order is one piece, allowing interfaces to be verified with a sample first.

Key Capabilities
- Materials: Polycarbonate (PC), clear or customer-specified grades; confirm material documents for flame-retardant requirements
- Tolerance: +/-0.005 mm on precision features; +/-0.008 mm for shaft diameters and locating holes, with inspection method defined
- Surface Finish: Turned diameters, milled flats and viewing areas specified separately; finish requirements depend on PC grade and function
- GD&T: Relate radial-hole position and anti-rotation-flat orientation to the turning axis and drawing datums; define inspection method by order
- Max Size: Turning up to diameter 1250 mm at 2000 mm length (1200 mm conservative); 3-axis milling travel 3000 x 1600 x 1400 mm; combined size depends on geometry and setup
- Surface Treatment: Define PC-compatible appearance for viewing areas, flats and interfaces by customer standard
- Thread: Drawing-defined interface threads and fit; confirm thread geometry against PC grade and wall thickness
- Precision Limit: Relate turned and milled features to drawing datums; thin-wall clamping, cross-hole edges and cleanup depend on geometry

PC Turn-Milled Interfaces Referenced to the Turning Axis
Turning and milling combine milled flats and side holes with the cylindrical profile of a PC connector. Referencing radial holes and anti-rotation flats to the turning axis defines the interface assembly orientation. Identify functional datums and dimensions requiring inspection on the drawing.
PC Thin-Wall Cylinders Through Turning and Milling Setups
Thin-wall PC cylindrical connectors need support and workholding plans for both turning and milling, considering tool access and wall-thickness distribution. The minimum plastic wall capability is 1.5 mm. Actual part geometry and clamping method affect the machining plan.
PC Connector Flats, Slots and Threaded Interfaces
PC interface parts can combine turned shoulders, milled anti-rotation flats and locating slots, and drawing-defined threads. Cross-hole deburring can be arranged for connectors with side holes. Define internal edge and cleanliness requirements on the drawing or sample.
PC Interface Inspection Across Axial and Side Features
Inspection can verify side-hole positions relative to the rotational datum, anti-rotation flat orientation and locating-hole dimensions, using the method specified on the drawing. PC precision-feature dimensional tolerances can reach +/-0.005 mm, while shaft diameters and locating holes can reach +/-0.008 mm. Critical dimensions and appearance can receive 100% inspection according to order requirements.
Specifications
| Product Name | Custom Polycarbonate CNC Turning and Milling Parts |
|---|---|
| Manufacturer | XCM CNC |
| Factory Location | Shenzhen, Guangdong, China |
| Quality System | ISO 9001, ISO 13485, IATF 16949, GJB9001C |
| Machining Process | CNC turning and milling |
| Material | Polycarbonate (PC) |
| Material Grade | Clear PC or customer-specified flame-retardant grade; confirm material documents and transparency requirements |
| Tolerance | +/-0.005 mm on precision features; +/-0.008 mm for shaft diameters and locating holes |
| Surface Treatment | Specify viewing areas, milled flats, threads and mating diameters separately; define PC-compatible appearance by drawing |
| Application | Anti-rotation insulating connectors; transparent sensor housings with side ports; viewing connectors with radial interfaces; cylindrical instrument housings with mounting ears |
| Key Features | Turned profiles combined with milled flats, slots, radial holes and threaded interfaces; support and setup planning for thin-wall cylinders |
| Critical QC Requirements | Radial-hole position from turning datum, flat orientation, locating-hole dimensions, interface edges and cleanliness |
| MOQ | 1 Piece |
| Typical Lead Time | 10-15 days; prototype 3-7 days, subject to part complexity and quantity |
| Drawing Formats | STEP, IGS, DWG, PDF, X_T |
Applications
Insulating Fittings for Electronic Connectors
Typical parts: Anti-rotation insulator fitting, slotted connector sleeve
PC’s insulating properties and toughness suit connector interface structures. Turning interface outside diameters and locating shoulders, then milling anti-rotation flats and locating slots, combines cylindrical mating surfaces and orientation features within one part. Locking loads and flame-retardancy requirements depend on the grade and interface design.
Transparent Housings for Industrial Sensors
Typical parts: Side-port sensor cover, cylindrical housing with mounting flats
Transparent PC housings let operators observe sensor status. Turning the cylindrical profile and end shoulders, then milling side holes and mounting flats, suits structures with both rotational datums and transverse interfaces. State cleaning-agent and cutting-fluid contact conditions and side-hole edge appearance requirements in the project information.
Transparent Viewing Connectors for Laboratory Instruments
Typical parts: Radial-port viewing connector, clear tubing connector
Transparent connectors allow internal flow passages or connection status to be observed. Turning bores and end mating surfaces, then milling radial interfaces and wrench flats, accommodates designs combining cylindrical geometry and lateral features. Pressure, sealing and media compatibility depend on actual drawings, loads and the selected material.
Cylindrical Connector Housings for Diagnostic Equipment
Typical parts: Cylindrical instrument connector housing, stepped mounting boss housing
Transparent PC housings suit instrument connection structures that require internal visibility. Turning cylinders and locating shoulders, then milling mounting ears and connection holes, accommodates circumferential fits and planar mounting features. Medical contact category, cleaning methods and disinfection requirements depend on the specific project.
Why Choose Us
Quality Systems and Equipment for Turned and Milled Interface Parts
XCM CNC has ISO 9001, ISO 13485, IATF 16949 and GJB9001C quality systems, with equipment from brands including DMG, Mazak, Matsuura and Brother. These resources support machining of cylindrical profiles, side holes and flat interface features on PC connectors.
Turning and Milling Planned Around Rotational Datums and Lateral Interfaces
From small insulating connectors to larger cylindrical structural parts, turning and milling can be planned around axial datums, anti-rotation flats, radial holes, fixture access and hole-edge cleanliness requirements. Machinable sizes for combined-feature parts depend on geometry, workholding and tool access.
Four-Tier Machine Selection Based on Precision
XCM CNC selects equipment from four tiers covering mainland China, Taiwan, Japan, Europe and the United States according to part and operation precision requirements. Machining approaches are matched separately to locating holes, side-hole orientation and cylindrical mating surfaces to balance machining quality and cost.
Order-Specific Inspection Records for Critical Interfaces
Radial-hole positions relative to rotational datums, anti-rotation flat orientation and locating-hole dimensions can be included in CMM or first article reports according to order requirements. Hole-edge burr and cleanliness acceptance criteria can also be defined to help you verify connector assembly interfaces.
Sample Interface Verification Before Batch Production
PC turned and milled connectors can be customized to drawings or samples. Samples allow radial holes, flat orientations and fit relationships to be checked before batch production is arranged following your approval. An NDA can be signed on request if drawings contain unpublished interface information.
FAQ
How should radial holes and anti-rotation flats be referenced?
Reference radial-hole orientation and anti-rotation flat direction to the rotational axis or the drawing-specified datum, and identify critical inspection dimensions. This allows the relative interface orientations to be checked directly.
Can turning and milling features be planned together on a PC connector?
Yes. Turning, flat milling and drilling requirements can be planned together around cylindrical surfaces and lateral interfaces. The setup sequence and tool access depend on part geometry.
What tolerance is available for PC interface features?
PC precision-feature dimensional tolerances can reach +/-0.005 mm, while shaft-diameter and locating-hole dimensional tolerances can reach +/-0.008 mm. Specify the features, fit requirements and inspection methods separately.
How are burrs handled at cross holes in a PC part?
Cross-hole deburring can be arranged. Define internal edge and cleanliness standards on the drawing or sample so that the acceptance scope can be set for the interface requirements.
What information helps confirm the combined part size?
Provide complete drawings or a 3D model and workholding datums. Turning capacity and milling-machine travel apply to their respective operations. Combined part size also depends on geometry, fixtures and tool access.
What are the MOQ and typical lead times for PC turn-milled parts?
The minimum order is one piece. Prototypes typically take 3-7 days, and standard orders typically take 10-15 days. Actual timing depends on part complexity and order quantity.
What should I include in a quote request for a PC connector?
Provide 2D/3D drawings, PC grade, tolerances, quantity and intended use. Identify rotational datums, side-hole orientations, anti-rotation flats, locating holes and hole-edge requirements. You can send STEP, IGES, STP, DWG or a dimensioned PDF.
Request a CNC Machining Quote from XCM CNC
Send us your drawings. Our team will review the file and reply with a machining quote. MOQ: 1 piece, with competitive low-cost pricing.



