
Custom Precision 5-Axis Machined UHMW Parts
Overview
XCM CNC machines UHMW curved guide blocks, shaped wear inserts and 5-axis parts with angled mounting faces in Shenzhen, with a maximum 5-axis machining size of 800 x 600 x 900 mm. Packaging conveyor guides commonly feature curved contact surfaces, holes in multiple directions and angled fastening faces. These features determine tool-approach directions and workholding orientations, and multiple faces can be machined in one setup on the DMG 80mono 5-axis machine. UHMW offers low friction and wear resistance for sliding-contact areas. Actual operating clearances depend on temperature and loads. The factory is certified to ISO 9001, ISO 13485, IATF 16949 and GJB9001C. Orders start at one piece, with standard lead times of 10-15 days.

Key Capabilities
- Materials: UHMW-PE (virgin, reprocessed, or modified grades); grade and color specified by drawing or order
- Tolerance: +/-0.005 mm on precision features; +/-0.008 mm for shaft diameters and locating holes
- Surface Finish: Reference values for soft plastics: Ra 3.2 um as-machined, Ra 1.6 um on optimized finishing passes; actual value depends on grade and machining method
- GD&T: Profile, position, and flatness per ISO 1101 callouts; achievable values for UHMW evaluated against the 3D model and part geometry
- Max Size: 5-axis envelope 800 x 600 x 900 mm; 3-axis milling travel 3000 x 1600 x 1400 mm
- Surface Treatment: Typically supplied as-machined with edge deburring; other requirements confirmed by order
- Thread: M2 and above recommended for UHMW; NPT / BSP / G / PT pipe threads available
- Precision Limit: +/-0.005 mm on specific precision features; roundness and hole-position limits for UHMW evaluated by drawing review

UHMW 5-Axis Machining for Curved Guide Surfaces
UHMW curved guide surfaces can be machined using 3-axis, 3+2-axis or 5-axis methods selected from the 3D model. The maximum 5-axis machining size is 800 x 600 x 900 mm. Using 5-axis orientations for angled faces, side holes and curved contact surfaces on shaped guide blocks can reduce toolpath transition marks. Long liner strips exceeding the 5-axis size can instead be machined face by face on 3-axis equipment with travel of 3000 x 1600 x 1400 mm.
UHMW Multi-Face Machining in One Setup
The maximum part size for multi-face machining in one setup is 600 x 1200 x 500 mm, allowing mounting and contact faces to be completed from the same datum. UHMW is relatively soft. Excessive clamping force compresses the part, which springs back after release, especially in thin-wall areas. The minimum plastic wall thickness is 1.5 mm. These areas typically require contoured fixtures or vacuum workholding to reduce clamping distortion.
UHMW Precision Tolerance on Fits and Locating Holes
UHMW precision-feature dimensional tolerances can reach +/-0.005 mm, while shaft diameters and locating holes can reach +/-0.008 mm. These are acceptance dimensions after machining. UHMW creep and thermal expansion cause operating clearances to change with temperature and loads, so specify machining tolerances and operating clearances separately on the drawing. UHMW tends to form stringy burrs during cutting. Hole openings and edges typically receive a 0.1 mm edge break.
UHMW Profile and Dimensional Inspection Equipment
UHMW curved surfaces and hole positions can be inspected with the Hexagon Inspector Classic 06.08.06 CMM. Planar hole positions and profiles can be checked with the WanHao Rational VMS-3020G 2.5D vision measuring system. Heights and step dimensions are measured with a TRIMOS 600L height gauge. For complex surfaces, 3D scanning or profile inspection can also be selected according to order requirements, with CMM reports or FAI first article reports supplied.
Specifications
| Product Name | Custom Precision UHMW 5-Axis Machined Parts |
|---|---|
| Manufacturer | XCM CNC |
| Factory Location | Shenzhen, Guangdong, China |
| Quality System | ISO 9001, ISO 13485, IATF 16949, GJB9001C |
| Machining Process | 5-axis CNC machining |
| Material | UHMW-PE |
| Material Grade | UHMW; specify grade, color, modification, or standard by drawing and order requirements |
| Surface Treatment | As-machined with edge deburring; reference Ra 3.2 um standard, Ra 1.6 um optimized finishing (by grade and machining method) |
| Application | Curved guide blocks, shaped wear inserts, star-wheel guides, gripper pads, and chute liners |
| Key Features | Curved contact profiles, angled mounting faces, multi-direction holes; 5-axis envelope 800 x 600 x 900 mm; 3-axis travel 3000 x 1600 x 1400 mm; plastic minimum wall 1.5 mm |
| Critical QC Requirements | Precision features +/-0.005 mm; shaft diameters and locating holes +/-0.008 mm; CMM / FAI reports by order; ISO 9001, ISO 13485, IATF 16949, GJB9001C certified |
| MOQ | 1 Piece |
| Typical Lead Time | 10-15 business days after drawing review |
| Drawing Formats | STEP, IGS, DWG, PDF, X_T |
Applications
Shaped Guide Blocks for Packaging Conveyors
Typical parts: Curved conveyor guide block, angled-mount guide pad
UHMW low friction and wear resistance suit guide surfaces in continuous contact with packaged products. For parts with curved contact profiles, angled mounting faces and lateral fastening features, the 3D model defines 5-axis tool-approach directions and machining orientations.
Star-Wheel and Bottle Guides for Bottling Lines
Typical parts: Star-wheel guide block, contoured bottle guide
Bottle-contact areas require wear-resistant, low-friction guide surfaces. Star-wheel recesses and mounting features in multiple directions can receive 5-axis machining planned from the part model. For parts contacting food or beverages, specify the exact UHMW grade, contact conditions and applicable compliance documentation.
Contoured Gripper Pads for Automation Equipment
Typical parts: Robot gripper pad, contoured workholding pad
UHMW wear-resistant, low-friction contact surfaces suit replaceable pads between grippers and workpieces. Surfaces conforming to the workpiece, angled mounting faces and fastening holes in multiple directions suit 5-axis machining plans. Assess clamping loads and dimensional changes under prolonged compression against the geometry and operating conditions.
Shaped Wear Liners for Bulk Material Handling
Typical parts: Chute transition liner, curved hopper wear pad
UHMW wear resistance and non-stick properties suit liner surfaces in sliding contact with bulk material. Long liners exceeding the 5-axis size can be machined on 3-axis equipment with 3000 mm travel. Wear pads with non-planar transition profiles require a 5-axis plan based on the 3D model.
Why Choose Us
Quality Systems and Inspection Equipment Support
XCM CNC has ISO 9001, ISO 13485, IATF 16949 and GJB9001C quality systems, with machining equipment from brands including DMG, Mazak, Matsuura and Brother, as well as dimensional inspection equipment. These resources support machining and inspection of UHMW 5-axis parts.
Machining Planned Around Curved Surfaces and Mounting Features
From curved contact zones to angled mounting faces and connecting features in multiple directions, we select 3-axis, 3+2-axis or 5-axis machining from the 3D model. Multi-face machining is planned around fixture space to help reduce feature-relationship errors caused by repeated positioning.
Tiered Equipment Selection for Low-Cost UHMW CNC Machining and Quality-Assured Production
XCM CNC uses four tiers of CNC equipment from mainland China, Taiwan, Japan, Europe and the United States to control machining costs while meeting quality requirements. Operations with less demanding tolerances use mainland Chinese or Taiwanese equipment, while high-precision operations use imported machines such as DMG and Mazak. Matching equipment to actual part precision requirements avoids assigning costly machine time to simple operations and reduces machining costs while meeting the drawing.
Report Formats Aligned with Your Acceptance Process
Inspection reports can use your company template, with critical-dimension numbering matched directly to the drawing balloon numbers for incoming inspection. New projects begin with a first article report. Subsequent batches retain the same report format for consistent archiving and traceability.
Sample Approval Before Production, with Drawing Confidentiality Throughout
You can install samples on your equipment to verify curved-surface contact and mounting positions before approving production. Batch production uses the machining plan and acceptance scope established with the approved sample. An NDA can be signed on request before the project begins.
FAQ
When should I choose 5-axis machining for a UHMW part?
Five-axis machining is more suitable when tools need to approach curved contact profiles, angled mounting faces or side holes from multiple directions. We select 3-axis, 3+2-axis or 5-axis machining based on the 3D model and fixture space.
What payment, shipping, and packaging options are available?
Payment options include T/T, PayPal and Western Union. Shipping options include DHL, FedEx, UPS or sea freight. UHMW parts are typically packed with foam in cartons. Large liners can be packed in wooden crates instead.
How should tolerances be defined for UHMW precision features?
UHMW precision-feature dimensional tolerances can reach +/-0.005 mm, while shaft-diameter and locating-hole dimensional tolerances can reach +/-0.008 mm. Specify datums, fit requirements and inspection methods on the drawing so that both parties use the same acceptance criteria for finished dimensions.
Does a machining tolerance guarantee the operating clearance over time?
Machining tolerances describe finished dimensions at delivery and do not establish long-term clearances under sustained loads and changing temperatures. UHMW low stiffness, creep and thermal expansion all affect service dimensions. State temperature, loads and part geometry when defining operating clearances.
How can you inspect a curved UHMW contact profile?
Curved profiles can be compared with the 3D model using a Hexagon CMM, or checked by 3D scanning or profile inspection. Specify profile tolerance requirements to ISO 1101 on the drawing. We assess achievable values against part geometry and agree on the report scope.
Can UHMW parts for food contact be supplied with FDA compliance?
Provide the exact UHMW grade, contact conditions and target-market requirements. For the US market, material documentation is typically checked against FDA 21 CFR 177.1520. Material certificates or SGS environmental test reports can be supplied according to order requirements.
What are the sample and production lead times?
Sample lead times are typically 3-7 days, and standard lead times are typically 10-15 days, depending on part complexity and order quantity. Production can be arranged after sample approval. The minimum order is one piece.
What information should I send for a quote?
Provide 2D/3D drawings, material grade or requirements, tolerances, quantity and intended use. State any temperature, loads or fit conditions that affect operating clearances. File formats can be STEP, IGES, STP, DWG or a dimensioned PDF. An NDA can be signed when needed.
Request a CNC Machining Quote from XCM CNC
Send us your drawings. Our team will review the file and reply with a machining quote. MOQ: 1 piece, with competitive low-cost pricing.



