
Custom ABS CNC Turning and Milling Parts
Overview
XCM CNC turn-mills ABS circular housings, knob connectors and sensor mounting sleeves. We add side holes, milled flats or notches to turned diameters to check interface orientation and fit. Our Mazak I-100S turn-mill center combines turning, milling and drilling, with specified precision features to +/-0.005 mm. MOQ is one piece. Prototypes typically take 3-7 days and standard orders 10-15 days, depending on complexity and quantity.

Key Capabilities
- Materials: ABS; specific grade, color and stock form confirmed by order
- Tolerance: +/-0.005 mm on precision features; +/-0.008 mm for shaft diameters and locating holes
- Surface Finish: Turned and milled contact surfaces; Ra and appearance requirements depend on grade, function and approved sample
- GD&T: Side-hole position and angular relationships inspected to stated datums
- Max Size: Turning: up to diameter 1200 mm (CNC lathe, conservative rating); milling: 3000 x 1600 x 1400 mm travel (3-axis mill). Turn-mill part size depends on geometry and setup.
- Surface Treatment: Machined finish as standard; any added surface treatment confirmed for the ABS grade and drawing
- Thread: Internal threads from M1.4, external threads from M2.0; go/no-go gauge inspection
- Precision Limit: 1.5 mm minimum plastic wall thickness; 0.5 mm minimum turned groove width

ABS Turned Diameters with Milled Flats
ABS knob sleeves and sensor mounts often have flats milled into a turned outside diameter for anti-rotation or location. Specify each flat’s position relative to the turned diameter on the drawing so both features meet the interface requirement.
ABS Side Holes and Angular Relationships
Radial holes and side slots are usually located from an end face or rotary axis. Angular location needs a clear datum, such as a flat or keyway. Once that datum and critical hole positions are marked, inspection can verify the direction of mating interfaces. Minimum internal thread in a side hole is M1.4 and can be checked with a go/no-go gauge.
ABS Datum Transfer Between Operations
The Mazak I-100S has a second spindle and can sequence turning, milling and drilling on one machine; opposite-end features can be machined after workpiece transfer. Turned diameters and end faces can serve as datums for later milling and drilling. Setup count depends on geometry, tool access and datum requirements.
ABS Mixed-Feature Prototype Verification
Prototype verification usually starts with mating shaft diameters, locating holes and side-hole positions. Specified precision features can use +/-0.005 mm size tolerance; shaft diameters and locating holes +/-0.008 mm. CMM inspection can check side-feature position and angle against drawing datums, with scope defined for the prototype.
Specifications
| Product Name | Custom ABS CNC Turning and Milling Parts |
|---|---|
| Manufacturer | XCM CNC |
| Factory Location | Shenzhen, Guangdong, China |
| Quality System | ISO 9001, ISO 13485, IATF 16949, GJB9001C |
| Machining Process | CNC turning and milling |
| Material | ABS |
| Material Grade | ABS; specific grade, color and stock form confirmed by order |
| Surface Treatment | Machined finish as standard; any added surface treatment confirmed for the ABS grade and drawing |
| Application | ABS knobs, circular housings and sensor mounting sleeves with mixed features |
| Key Features | Turned diameters, end faces, side holes, milled flats and slots; minimum plastic wall thickness 1.5 mm |
| Critical QC Requirements | Precision features +/-0.005 mm; shaft diameters and locating holes +/-0.008 mm; side-hole position and angular datums defined on the drawing |
| MOQ | 1 piece |
| Typical Lead Time | 10-15 days; prototypes 3-7 days |
| Drawing Formats | STEP, IGS, DWG, PDF, X_T |
Applications
Automotive sensor mounts and interface prototypes
Sensor mounting sleeves and interface blocks with mounting planes combine cylindrical interfaces, planes and locating holes. Turn-mill machining adds the plane and holes after establishing the rotary datum. ABS prototypes check interface positions and trial-assembly space during development. In-vehicle temperature, vibration and material needs follow the drawing and service conditions.
Side-port connectors for automation equipment
Pneumatic connector prototypes and sensor fitting blocks use cylindrical ends, end faces and radial holes to set assembly direction. Side holes can be positioned around rotary datums. Prototypes verify hole positions and clearance to adjacent parts; sealing, pressure and long-term service performance need separate project and material assessment.
Instrument knobs with locating flats
Adjustment knobs and keyed knob sleeves combine outside diameters and stepped end faces with anti-rotation flats or cross-holes for set screws. Turning alone cannot make every feature; turn-mill machining brings them into one part plan to check knob orientation and fit against shaft and panel.
Equipment handle-end mounts
Handle-end mounts and drilled cylindrical connectors combine a cylindrical connection on one end with mounting faces and transverse holes setting the fixing direction on the other. These rotary and prismatic features suit turn-mill prototypes. Samples verify layout and assembly; load and long-term use depend on the drawing and actual requirements.
Why Choose Us
Quality systems and turn-mill equipment
XCM CNC operates under ISO 9001, ISO 13485, IATF 16949 and GJB9001C quality systems. Equipment includes DMG, Mazak, Matsuura and Brother centers plus dimensional inspection tools. The Mazak I-100S can sequence cylindrical, mounting-plane and side-hole operations for ABS parts.
Machining from small fittings to large structures
Our range covers small connectors through large structural parts. Turn-mill components use a turn-mill center. Larger rotary parts use turning equipment with a conservative diameter 1200 mm capacity; large parts dominated by milling can use a 3-axis mill with 3000 x 1600 x 1400 mm travel. Equipment is chosen by size and features.
Four-tier equipment selection to control cost
We assign equipment from mainland China, Taiwan, Japan, Europe and the United States according to part and operation precision. Mating shaft diameters, locating holes and ordinary planar interfaces on a turn-mill part need different levels of control, so machine choice differs accordingly.
Inspection records for side-hole direction and datums
For side-port connectors or knob sleeves, we can inspect hole position, angular relationship and rotary mating faces against drawing datums. CMM or FAI reports are available by order to show whether interfaces match mating parts.
Production after prototype approval
A prototype can check the assembly relationship among cylindrical datums, side-hole direction and planar interfaces before production. Drawings with hole positions, angular datums and fit dimensions can be discussed after an NDA is signed if requested.
FAQ
Can a turned ABS part also include milled flats?
Yes. A turned outside diameter and milled flats can be planned on one part. Mark flat position relative to the cylindrical datum on the drawing to verify the anti-rotation or locating interface against the axis.
How should side-hole orientation be specified on an ABS part?
Mark the angular datum, side-hole position and relationship to the end face or rotary axis. The angular datum can be a flat, keyway or another clear feature. Inspection checks position and direction against the stated datums and drawing tolerances.
Can turning, milling and drilling be completed in one setup?
Turning, milling and drilling can be sequenced on one turn-mill machine. The Mazak I-100S provides all three operations, but completion in one setup depends on geometry, tool access and datums. A complete model and datum scheme let us identify which features can be combined.
How are turned and milled features inspected together?
We inspect shaft diameters, locating holes, side-hole direction and mounting planes against the drawing datums; functional threads use go/no-go gauges. CMM or FAI reports are available by order and cover the interface relationships marked on the drawing.
What tolerance applies to ABS shaft diameters and locating holes?
ABS shaft and locating-hole size tolerance is +/-0.008 mm. Specified precision features, such as critical dimensions and mating faces on parts under 100 mm, can use +/-0.005 mm. Metal h6/H7 fits do not transfer directly to ABS; define fits through actual size tolerances and assembly relationships.
What information is needed to quote ABS turn-milled parts?
Provide 2D drawings or a 3D model, ABS grade and color, stock form, quantity, and critical dimensions, tolerances, appearance and inspection needs. We accept STEP, IGES, STP, DWG and dimensioned PDF. Mark side-hole angular datums and their relationship to rotary faces.
Request a CNC Machining Quote from XCM CNC
Send us your drawings. Our team will review the file and reply with a machining quote. MOQ: 1 piece, with competitive low-cost pricing.



