CNC machining workshop
Custom Acrylic (PMMA) CNC Turning and Milling Parts

Custom Acrylic (PMMA) CNC Turning and Milling Parts

Material: Acrylic (PMMA) MOQ: 1 Piece Lead Time: 10-15 business days after drawing review
Email: [email protected] | WhatsApp: +8618638951317

Overview

XCM CNC makes custom acrylic (PMMA) parts that combine cylindrical bases with side holes, flats or mounting faces. Turning creates the rotary locating section, while milling or drilling forms lateral features. Side-hole angular position, flat orientation and mounting faces must relate to the part axis and end-face datums. Combining processes in fewer setups helps reduce positional shifts from reclamping. Transparent PMMA suits sensor windows, viewing chambers and interfaces where internal features must remain visible. We work from drawings or samples, starting at one piece. Prototypes typically take 3-7 days and standard orders 10-15 days.

custom pmma turning and milling parts

Key Capabilities

  • Materials: Acrylic / PMMA; specify grade and bar or sheet stock condition
  • Tolerance: +/-0.005 mm on precision features; +/-0.008 mm for shaft diameters and locating holes; datums and inspection method defined by drawing
  • Surface Finish: Specify viewing areas, polished edges and mating surfaces separately; provide appearance grade, scratch criteria and roughness or acceptance method
  • GD&T: Relate side holes, flats and mounting faces to the rotational datum; geometric limits and inspection method are feature-specific
  • Max Size: Mazak i-100S turn-mill center for integrated turn-mill parts; large turning uses dedicated lathe (diameter 1250 x 2000 mm confirmed); large milling uses dedicated mill (3000 x 1600 x 1400 mm travel). Combined-part size depends on geometry, features and setup
  • Surface Treatment: Polished, bright or matte finish to the specified appearance standard; confirm polishing scope and acceptance criteria from the drawing
  • Thread: Threaded features by drawing; specify thread standard, grade, depth and inspection requirement
  • Precision Limit: Plastic wall thickness from 1.5 mm depends on geometry and clamping; shaft diameters and locating holes use +/-0.008 mm tolerance; side-hole angular position and flats require datum definition

custom pmma turning and milling parts

PMMA Turn-Mill Datum Coordination for Side Features

Turn-mill planning references side holes, flats and mounting faces to the turned axis and end face so lateral features align with the rotary interface at assembly. A Mazak i-100S turn-mill center combines turning, milling and drilling for small and medium parts. Large parts or parts dominated by one process use a dedicated lathe or mill. Sequence and setups depend on geometry and drawing datums.

Shaft Diameter, Locating Hole and Angular Position Control in PMMA Turn-Mill Parts

Shared datums relate turned mating sections to milled angled holes, locating flats and mounting faces. Specified PMMA precision features can reach +/-0.005 mm; shaft diameters or locating-hole sizes can reach +/-0.008 mm. To control side-hole angular position or a flat’s direction across processes, mark the rotary axis, end-face datum and side-feature angle or orientation on the drawing so inspection can be planned.

Cross-Hole Deburring and Internal Edge Requirements for PMMA

Cross-holes can be deburred. Mark the internal exits and edges needing burr removal and define acceptable edge condition. Slots, flats and threaded interfaces can also have functional edge requirements to avoid assembly problems from burrs or sharp edges. Specify internal cleanliness and inspection in relation to the part’s use and medium.

Transparent Viewing Surfaces and Mating Face Tolerances on PMMA Parts

Transparent viewing areas can have appearance requirements separate from turned mating faces and milled mounting faces. Specify visible regions, appearance grade, scratch criteria, and roughness requirement or acceptance method. Polishing scope follows the drawing and standard; mating dimensions and mounting-hole positions are called out separately so polishing does not affect dimensional acceptance.

Specifications

Product Name Custom Acrylic CNC Turning and Milling Parts
Manufacturer XCM CNC
Factory Location Shenzhen, Guangdong, China
Quality System ISO 9001, ISO 13485, IATF 16949, GJB9001C
Machining Process CNC turning, milling and drilling for rotational bases combined with side features around shared datums
Material Acrylic (PMMA)
Material Grade Specify PMMA grade and bar or sheet stock condition
Surface Treatment Polished, bright or matte finish to the specified appearance standard; define visible-area scope and scratch criteria
Inspection Dimensional and CMM inspection available by drawing and order requirement; FAI report per customer format
Application Transparent sensor housings with side windows, viewing chambers with side ports, diagnostic interfaces with mounting lugs, display connectors with flats, light-guide fittings with locating features
Key Features Turned rotational bases combined with milled or drilled side holes, flats, mounting faces and cross holes; coordinated datums for side-feature angular position and direction; wall thickness from 1.5 mm depends on geometry and clamping
Critical QC Requirements Precision features +/-0.005 mm; shaft-diameter and locating-hole dimensions +/-0.008 mm; define rotational axis, end-face and side-feature datums plus angular position and deburring criteria
MOQ 1 Piece
Typical Lead Time 10-15 business days after drawing review
Drawing Formats STEP, IGS, DWG, PDF, X_T

Applications

Transparent optical sensor housings

Typical parts: Cylindrical sensor housing, side-window mount

Transparent PMMA lets a sensor housing show its interior or transmit light. Turning makes the cylindrical mount, while milling forms a side window, flat or mounting hole. Drawing datums relate these features to the rotary interface. Optical and mounting areas can have separate surface and inspection requirements.

Research fluid viewing chambers

Typical parts: Cylindrical viewing chamber, side-port sample cell

Transparent PMMA lets fluid or samples inside a chamber be observed. Turning produces the axial cavity and end face; milling forms side ports and mounting faces. Define medium, pressure, sealing method and internal cross-hole burr requirements against the drawing and service conditions.

Transparent interfaces for diagnostic equipment

Typical parts: Diagnostic viewing interface, transparent connector with mounting lugs

PMMA suits clear interfaces used to view fluid or equipment status. Turning makes rotary sealing fits; milling adds side holes, lugs or locating flats. Assess grade, contact medium, disinfection and documentation against the drawing and use.

Transparent display-model connectors

Typical parts: Cylindrical display connector, slotted transparent support

PMMA suits model connectors where the internal structure should remain visible. Turning forms cylindrical connections and steps; milling adds locating flats or slots so the clear part mounts at the specified position. Set appearance and scratch criteria by project.

Prototype lighting light-guide interfaces

Typical parts: Light-guide interface prototype, lighting connector with locating flat

Transparent PMMA can test the relative location of light-guide elements and interfaces in a lamp. Turning makes the cylindrical locating section; milling adds an orientation flat or side hole to match the lamp mount. Light distribution and visible-surface requirements depend on material, thickness and surface standard.

Why Choose Us

Quality systems and turn-mill equipment

We operate under ISO 9001, ISO 13485, IATF 16949 and GJB9001C quality systems, with DMG, Mazak, Matsuura and Brother equipment. A Mazak i-100S turn-mill center combines rotary and side-feature machining; large turning and milling use dedicated equipment.

Turning, milling, drilling and surfaces coordinated

For integrated PMMA interfaces, turning the rotary section, milling mounting faces and drilling lateral features are planned around the part. We confirm appearance and dimensional acceptance separately for visible and mating areas.

Equipment matched to precision and cost

Turn-mill parts require control of shaft diameters, locating holes and side features. We choose machines from tiers in mainland China, Taiwan, Japan, Europe and the United States according to the part, balancing quality and cost.

First-article checks of related turn-mill features

At the prototype stage, we can check how the rotary axis relates to side-hole angle, flats and mounting faces, and confirm datum definitions and inspection method. Dimensional or first article inspection reports are available by order to support interface acceptance.

Batch production after prototype approval

Batch production can follow prototype approval. Prototypes typically take 3-7 days and standard orders 10-15 days, subject to complexity and quantity.

FAQ

What part features are well suited to turning and milling together?

Combined turning and milling suit a part with a cylindrical locating section plus side holes, flats or mounting faces. These features can be planned around shared datums so lateral position and orientation relate to the rotary interface. Process and setups still depend on geometry and drawing requirements.

How should I locate angled side holes on a cylindrical part?

Mark the rotary axis, end-face datum and side-hole angle and direction on the drawing. This relates the hole to the cylindrical interface, flat or mounting face for inspection and reduces accumulated position error from repeated setups.

How should burrs at cross-hole exits be specified?

Identify the internal exit of each cross-hole and the edges to deburr. Define the acceptable edge condition and cleanliness. Acceptance scope should follow the actual passages and assembly function.

Can PMMA be used for a transparent connector exposed to impact?

PMMA suits parts that prioritize clear viewing or light guidance, but impact exposure needs a separate material assessment. If impact resistance is the main requirement, compare candidates such as PC against the actual load.

What PMMA information helps assess chemical compatibility?

Provide the PMMA grade, contact medium or cleaner, temperature and exposure duration. These help assess chemical compatibility and stress-cracking risk in the machined material.

What files should I provide for a turn-mill quotation?

Provide 2D/3D drawings, PMMA grade, quantity, tolerances and intended use. Mark the rotary axis, end-face datum, side-hole angle and visible areas. We accept STEP, IGES, STP, DWG and dimensioned PDF.

Can the design be protected under an NDA?

Yes. We can sign an NDA on request. State confidentiality requirements when submitting drawings so the design information can be handled as agreed.

Certified Quality ISO 9001 | ISO 13485 | GJB9001C | IATF:16949 View Quality Control & Inspection Proof

Request a CNC Machining Quote from XCM CNC

Send us your drawings. Our team will review the file and reply with a machining quote. MOQ: 1 piece, with competitive low-cost pricing.

Contact Form Demo 2

STEP, IGS, STL, DWG, DXF, PDF, JPG or ZIP. Max. 50 MB. Multiple or large files? Email: [email protected]

You May Also Like