CNC machining workshop
Custom Precision Acrylic (PMMA) CNC Turned Parts

Custom Precision Acrylic (PMMA) CNC Turned Parts

Material: Acrylic (PMMA) MOQ: 1 piece Lead Time: 10-15 days; sampling 3-7 days
Email: [email protected] | WhatsApp: +8618638951317

Overview

XCM CNC precision turns custom acrylic (PMMA) sleeves, rings and stepped cylinders for light-guide rods, transparent sensor housings, fluid sight sleeves and instrument barrel rings. Bores, outside diameters, end faces and mating shoulders are machined around a common rotary datum, with specified precision features to +/-0.005 mm. We make parts from drawings or samples, starting at one piece. Prototypes generally take 3-7 days and standard orders 10-15 days, depending on complexity and quantity.

custom pmma cnc turned parts

Key Capabilities

  • Materials: Acrylic / PMMA bar or tube, cast or extruded stock condition by grade
  • Tolerance: +/-0.005 mm on precision features; +/-0.008 mm for shaft diameters
  • Surface Finish: Machined contact surfaces; finish requirements depend on grade and function. Polished viewing surfaces in mirror, bright or matte grades
  • GD&T: Bore, outer diameter and end-face relationships controlled against drawing datums; limits and inspection method set per feature
  • Max Size: Turning diameter up to 1250 mm at 2000 mm workpiece length (1200 mm conservative); practical size depends on PMMA stock and clamping support
  • Surface Treatment: Mirror, bright or matte polishing to the specified appearance standard
  • Thread: Internal threads from M1.4 and external threads from M2.0; go/no-go gauge inspection; suitability in PMMA depends on pitch, depth and load
  • Precision Limit: Minimum plastic wall thickness 1.5 mm, depending on diameter, length and clamping support

custom pmma cnc turned parts

PMMA Turned Concentric Sleeves and Rings

Turning forms the outside diameter, bore, shoulder and end face of a sleeve or ring around one rotary datum, helping maintain their assembly relationship. Specified precision features can be held to +/-0.005 mm and shaft diameters to +/-0.008 mm. Define roundness, runout, datums and inspection method on the drawing.

PMMA Thin Sleeve Clamping and Fit

Minimum PMMA sleeve wall thickness is 1.5 mm, depending on diameter, length, geometry and workholding support. Acrylic is relatively brittle; excessive clamping or concentrated cutting heat can distort thin walls radially and change bore and outside-diameter fits. We assess workholding against the mating part and wall thickness during quoting.

PMMA Turned Shoulders, Grooves and Threads

End faces and shoulders locate a sleeve axially, while grooves or threads provide connections. Minimum groove width is 0.5 mm, minimum internal thread M1.4 and minimum external thread M2.0; threads are checked with go/no-go gauges. Acrylic is sensitive to sharp corners and shallow thread forms, so thread size, depth and working load are reviewed against the drawing.

PMMA Polished Cylindrical Viewing Surfaces

Visible cylindrical surfaces can have appearance requirements separate from mating bores, shoulders and sealing interfaces. Polishing options include mirror, bright and matte. Mark visible areas and scratch criteria on the drawing. Polishing removes a little material, so mating sections should be accepted at their final, polished dimensions. Transparency and appearance are judged by polish grade and scratch limits, not by a single Ra value.

Specifications

Product Name Custom Precision Acrylic CNC Turned Parts
Manufacturer XCM CNC
Factory Location Shenzhen, Guangdong, China
Quality System ISO 9001, ISO 13485, IATF 16949, GJB9001C
Machining Process CNC turning of sleeves, rings, bores, external diameters and shoulders
Material Acrylic (PMMA)
Material Grade PMMA grade and cast or extruded bar or tube condition specified per order
Surface Treatment Mirror, bright or matte polishing to the specified appearance standard
Inspection Dimensional inspection and CMM reporting available by order requirement
Application Light-guide rods, transparent sensor housings, fluid sight sleeves and instrument barrel rings
Key Features Turned bores, external diameters, end faces, shoulders, grooves and threads; plastic wall thickness from 1.5 mm depending on geometry and support
Critical QC Requirements Precision features +/-0.005 mm; shaft diameters +/-0.008 mm; rotational datum, mating features and inspection method defined per drawing
MOQ 1 piece
Typical Lead Time 10-15 days; sampling 3-7 days
Drawing Formats STEP, IGS, DWG, PDF, X_T

Applications

Cylindrical LED light-guide rods

LED light-guide rods and cylindrical guides carry light from an end face to a specified location. Turning forms the outside diameter, end face and locating shoulder that fits the lamp holder. End-face polish and scratch limits affect light output and should be specified separately from locating dimensions.

Round transparent sensor housings

Sensor housings and round viewing covers allow the internal condition to be seen. Turning creates the cylinder, bore and shoulder mount for coaxial assembly to a base. Cleaning-agent exposure and load should be considered when selecting the material.

Liquid-level and fluid sight sleeves

Liquid-level sight sleeves and transparent viewing connectors allow direct observation of fluid. Turning produces the bore, outside diameter and end-face interface; the end face and shoulder locate and seal the assembly. Assess the medium, pressure, temperature and sealing method against service conditions.

Instrument barrel rings

Instrument barrel rings and stepped transparent interface rings locate coaxially within a mount. Turning makes inner and outer diameters, end faces and annular shoulders. Thin-wall rings start at 1.5 mm wall thickness, subject to diameter and clamping support. Confirm grade and required documents from the drawing and order.

Why Choose Us

Quality systems and equipment

Our quality systems include ISO 9001, ISO 13485, IATF 16949 and GJB9001C. DMG, Mazak, Matsuura and Brother equipment lets us turn transparent sleeves and rings within one factory.

Turning, grooves, threads and polishing coordinated

Our scope covers small connectors through large structural parts. Turning transparent sleeves, machining shoulders and grooves, threading, and mirror, bright or matte polishing can be coordinated in one shop, reducing handoffs between suppliers.

Equipment matched to precision and cost

Sleeve diameter, length and fit accuracy determine the lathe type. We match each part and operation to equipment tiers from mainland China, Taiwan, Japan, Europe and the United States to balance quality and cost.

Inspection methods for rotary features

Roundness instruments, height gauges and CMMs can inspect sleeve roundness, runout and bore diameter; threads are checked with go/no-go or ring gauges. CMM and first article inspection (FAI) reports are available by order in the customer’s report format.

Material certificates and grade confirmation

Material certificates, including material identification and SGS environmental reports, can be provided by order. We confirm PMMA grade, bar or tube stock, and cast or extruded condition during quoting for traceability in later batches.

FAQ

Should I use PMMA bar stock or tube stock for a turned sleeve?

Tube stock generally reduces material removal for a thin-wall sleeve with a large bore; solid or small-bore parts generally use bar stock. Cast or extruded condition affects machined surfaces and stress release, so specify the PMMA grade and bar or tube condition when quoting.

Why does clamping affect the fit of a thin PMMA sleeve?

Clamping can deform a thin sleeve radially, and dimensions may spring back after release. Even with a 1.5 mm minimum wall, feasibility depends on diameter, length, geometry and support. Mark the mating section and assembly relationship on the drawing to help choose clamp locations.

Which dimensions should be reviewed after polishing a sleeve?

Polishing removes a little material, so mating sections should be accepted at their final polished sizes. Mark the visible cylindrical face to polish and distinguish the bore, shaft diameter, shoulder or sealing fit. Specify mirror, bright or matte grade and scratch criteria.

What should I consider if the sleeve contacts a fluid or cleaning agent?

Some solvents and cleaners can create fine cracks on acrylic surfaces, especially at stress concentrations. Identify the medium or cleaner, temperature and exposure duration so suitability can be assessed for the PMMA grade.

Which sleeve features should I include in a CMM or inspection report?

A CMM report is available by order; roundness and runout can also be checked with a roundness instrument. Specify which bore, outside diameter or end face to inspect, the datum and tolerance, and the report scope. The inspection method follows the feature.

What details should I send for a turned-part quotation?

Provide 2D/3D drawings, PMMA grade, bar or tube condition, quantity, fit tolerances and intended use. Mark bore, outside-diameter and end-face datums. We accept STEP, IGES, STP, DWG and dimensioned PDF.

What are the usual sample and order lead times?

MOQ is one piece. Prototypes typically take 3-7 days and standard orders 10-15 days, depending on complexity and quantity. Approve a prototype before batch production.

Can I request an NDA before sharing sleeve drawings?

Yes. We can sign an NDA as requested. State confidentiality needs and the design information to protect when inquiring.

Certified Quality ISO 9001 | ISO 13485 | GJB9001C | IATF:16949 View Quality Control & Inspection Proof

Request a CNC Machining Quote from XCM CNC

Send us your drawings. Our team will review the file and reply with a machining quote. MOQ: 1 piece, with competitive low-cost pricing.

Contact Form Demo 2

STEP, IGS, STL, DWG, DXF, PDF, JPG or ZIP. Max. 50 MB. Multiple or large files? Email: [email protected]

You May Also Like