
Custom Precision CNC-Turned PPS Parts
Overview
XCM CNC provides precision PPS turning for cylindrical parts such as bushings, sleeves, insulating rings and seal seats whose bores, outside diameters, shoulders and end faces must fit together. These parts are commonly used in connectors, sensors, valves and electric-drive assemblies. PPS is often selected for its heat and chemical resistance, insulating properties and dimensional stability. The specific grade and glass- or carbon-fiber fill are defined by the drawing. Orders start at one piece, with typical lead times of 10-15 days depending on part complexity and quantity.

Key Capabilities
- Materials: PPS, including glass-fiber or carbon-fiber filled grades; grade specified on the drawing
- Tolerance: +/-0.005 mm on precision features; +/-0.008 mm for shaft diameters and locating holes
- Surface Finish: Machined sealing and contact surfaces; finish requirements depend on PPS grade and function
- GD&T: Coaxiality 0.012 mm for related bore and outside-diameter features; datum and inspection method defined by drawing
- Max Size: Turning up to diameter 1250 mm at 2000 mm workpiece length; actual PPS part size depends on geometry and setup
- Surface Treatment: As-machined PPS; any additional treatment reviewed by material and drawing
- Thread: Internal threads from M1.4 and external threads from M2.0, subject to PPS grade and thread depth
- Precision Limit: 1.5 mm minimum plastic wall; sleeve diameter, length and clamping set the practical limit

PPS Bores and Outside Diameters
Turning produces bores, outside diameters, steps and end faces on bushings, sleeves and insulating rings. For parts with clearly defined rotational datums, the relationships between bores, outside diameters and end faces can be specified directly on the drawing and inspected. Shaft-diameter dimensional tolerance is +/-0.008 mm.
PPS Sleeve Walls and Clamping
PPS is relatively brittle. Clamping pressure and unsupported length affect final dimensions and edge quality on long or thin-wall sleeves. The minimum plastic wall capability is 1.5 mm. For large-diameter or long sleeves, practical wall thickness also depends on the clamping area and workholding method.
PPS Seal Seats and Threads
Dimensions and surface requirements for seal seats, grooves and threads depend on mating components and sealing interfaces. Machined edges and surface appearance differ between glass-filled and unfilled grades. Specify roughness and texture according to the grade and contact-surface function. Functional threads are inspected with go/no-go or ring gauges.
Precision PPS Mating Features
Precision features mating with shafts, bores or end faces have a dimensional tolerance of +/-0.005 mm, while shaft diameters and locating holes are +/-0.008 mm. Define datums and inspection methods on the drawing, and list any roundness or runout requirements so that CMM or roundness inspection can be selected for acceptance.
Specifications
| Product Name | Custom Precision PPS CNC Turned Parts |
|---|---|
| Manufacturer | XCM CNC |
| Factory Location | Shenzhen, Guangdong, China |
| Quality System | ISO 9001, ISO 13485, IATF 16949, GJB9001C |
| Machining Process | CNC turning of PPS bores, outside diameters, shoulders and end faces |
| Material | PPS |
| Material Grade | PPS grade and GF/CF fill specified on the drawing; no stock grade assumed |
| Surface Treatment | As-machined; additional treatment reviewed by material and drawing |
| Max Part Size | Diameter 1250 mm at 2000 mm workpiece length; actual PPS part size reviewed by geometry and setup |
| Inspection | Critical-dimension and geometric inspection; CMM or FAI report by order requirements |
| Application | PPS bushings, sleeves, insulating rings and turned seal components |
| Key Features | Turned bores, outside diameters, shoulders, grooves and threads; plastic wall from 1.5 mm subject to geometry and clamping |
| Critical QC Requirements | +/-0.005 mm on precision features; +/-0.008 mm on shaft diameters and locating holes; bore/OD relationships need defined datum and inspection |
| MOQ | 1 Piece |
| Typical Lead Time | 10-15 business days after drawing review |
| Drawing Formats | STEP, IGS, DWG, PDF, X_T |
Applications
Connector Insulator Sleeves and Coil Bobbins
Connector insulator sleeves and coil bobbins locate pins or coils through bores, outside diameters and end faces. Coaxial relationships and shoulder positions directly affect assembly. PPS temperature resistance and insulating properties suit these applications. Insulation data must correspond to the selected grade; conductive modified grades are not assumed to be insulating.
Round Sensor Housings and Isolation Sleeves
Outside diameters, bores and shoulders on sensor housings and isolation sleeves determine accurate probe location and fit with mounting holes. PPS heat and chemical resistance can inform material selection. Actual temperature, media and fit requirements depend on operating conditions.
Valve Seats and Sealing Isolation Rings
Critical features on valve seats and sealing isolation rings include cylindrical sealing surfaces, end faces and grooves. Their roughness and edge condition affect sealing performance. PPS chemical resistance makes it a candidate for these structures. Media, pressure, temperature and seal design require project-specific validation. Glass-filled grades also require attention to sealing-surface characteristics.
Electric-Drive Insulation Standoffs
Electric-drive insulation standoffs maintain spacing between components. The positions of both end faces and the step dimensions determine spacing accuracy. PPS temperature resistance and insulating properties suit this use. Insulation ratings and assembly loads must be defined by project requirements.
Why Choose Us
Quality Systems, Machining and Inspection Equipment
XCM CNC has ISO 9001, ISO 13485, IATF 16949 and GJB9001C quality systems, with machining equipment from brands including DMG, Mazak, Matsuura and Brother, as well as dimensional inspection equipment. Machining and inspection of bores, outside diameters, shoulders and end faces on PPS bushings and insulating rings can be organized within these systems.
Turning Support from Small Bushings to Large-Diameter Rings
Small bushings and insulating rings, as well as large-diameter sleeves and rings, can receive turning, drilling, grooving and threading in the same factory. Larger workpieces can be assessed against a turning range of diameter 1250 mm x 2000 mm, with the actual plan depending on PPS part geometry and workholding.
Equipment Matched to PPS Precision Requirements
We use a four-tier equipment mix from mainland China, Taiwan, Japan, Europe and the United States, matching machines to part and operation precision requirements to balance machining quality and cost. Precision mating bores and shafts can use a different equipment precision tier from general end faces and profiles, allowing more appropriate costs.
Bore and Outside-Diameter Datums with Inspection Reports
Dimensions and geometric relationships between bores, outside diameters and end faces on cylindrical mating parts can be checked against drawing datums. Critical-dimension inspection, CMM reports or FAI first article reports in your format can be supplied to order. Acceptance items reflect the actual assembly to help you verify how sleeves fit mating shafts and bores.
Sample Fit Checks Before Batch Production
Orders start at one piece, with sample approval before batch production. Sample lead times are 3-7 days, and typical lead times are 10-15 days, depending on part complexity and order quantity. Samples allow inside and outside diameters and shoulders to be checked against mating parts before batch requirements are finalized.
FAQ
How are PPS shaft diameters and precision mating features toleranced?
Precision PPS features have dimensional tolerances of +/-0.005 mm, while shaft diameters and locating holes are +/-0.008 mm. Fit classes such as h6 and H7 on the drawing can be discussed as fit requirements, but cannot be derived directly from these two values. Specify datums and geometric requirements separately for any roundness, coaxiality or runout relationships between bores, outside diameters and end faces.
What should I specify for a thin-wall PPS sleeve?
The minimum plastic wall capability is 1.5 mm. Practical sleeve wall thickness depends on diameter, length and clamping method. Specify inside and outside diameters, length, wall thickness and permitted clamping areas, and explain the fit with the mating shaft or bore so that we can assess workholding.
How are a PPS bore and outside diameter inspected together?
Dimensions and geometric relationships between bores, outside diameters and end faces are inspected against drawing-specified datums using equipment such as CMMs or roundness testers. Report scope depends on order requirements. CMM reports or FAI first article reports in your format can be supplied. Define critical sections and coaxiality, roundness or runout requirements before acceptance inspection.
Can turned PPS valve seats include grooves and threads?
Yes. Sealing grooves, internal and external threads and shoulders can be turned to drawing on PPS parts. Minimum internal threads start at M1.4 and external threads at M2.0, with go/no-go or ring gauge inspection. Thread depth and suitability depend on the PPS grade. Specify groove geometry, thread standards and mating components on the drawing.
How can glass-filled PPS affect a turned sealing surface?
Glass-filled grades have different machined-edge and surface appearance from unfilled grades. Results depend on the grade, geometry and machined surface. Specify sealing-surface roughness, texture and edge requirements so that machining and acceptance inspection can be planned accordingly.
Does dimensional inspection predict PPS fit at operating temperature?
Dimensional inspection alone does not predict fit at operating temperature. Finished-part inspection reflects dimensions under the agreed inspection conditions. Fit retention under service temperature and load must be assessed using material data for the selected grade. State the actual temperature and load if hot-fit performance is required.
Which PPS material and drawing details help prepare a turning quote?
A quote requires 2D or 3D drawings, PPS grade and fill type, tolerances, quantity and intended use. Supported formats include STEP, IGES, STP, DWG and dimensioned PDF. Orders start at one piece. Identify critical dimensions, groove geometry, threads and surface requirements on the drawing. An NDA can be signed on request to protect drawings.
Request a CNC Machining Quote from XCM CNC
Send us your drawings. Our team will review the file and reply with a machining quote. MOQ: 1 piece, with competitive low-cost pricing.


