CNC machining workshop
Position > > Plastic Materials > > PPS Machining
Custom CNC Turned and Milled PPS Parts

Custom CNC Turned and Milled PPS Parts

Material: PPS MOQ: 1 Piece Tolerance: +/-0.005 mm on precision features; +/-0.008 mm on shaft diameters and locating holes Lead Time: 10-15 business days after drawing review
Email: [email protected] | WhatsApp: +8618638951317

Overview

XCM CNC provides combined turning and milling for PPS parts requiring both cylindrical surfaces and lateral features. Typical parts include sensor mounts with side holes, fluid fittings with wrench flats and connector insulators with anti-rotation keyways. Outside diameters and end faces can be machined together with side holes, flats or keyways around the same rotational datum. PPS resists heat and chemicals, while insulating properties and surface condition vary with the grade and glass- or carbon-fiber fill. Specify these details with your inquiry. Orders start at one piece, with typical lead times of 10-15 days depending on part complexity and quantity.

custom pps turning and milling parts

Key Capabilities

  • Materials: PPS, including glass-fiber (GF) and carbon-fiber (CF) filled grades specified by drawing; no stock grade assumed
  • Tolerance: +/-0.005 mm on precision features; +/-0.008 mm for shaft diameters and locating holes
  • Surface Finish: Machined contact and sealing surfaces; finish requirements depend on PPS grade and function
  • GD&T: Coaxiality 0.012 mm for related turned features; datum and inspection method defined by drawing
  • Max Size: Turning: up to diameter 1250 mm at 2000 mm workpiece length; 3-axis milling machine travel: 3000 x 1600 x 1400 mm; turn-mill combined part size depends on geometry, fixture and setup
  • Surface Treatment: As-machined PPS; deburring and edge breaking available; other treatments reviewed by grade and drawing
  • Thread: Internal threads from M1.4, external threads from M2.0; go/no-go or ring gauge inspection; suitability depends on PPS grade and feature
  • Precision Limit: +/-0.005 mm on precision features; 1.5 mm minimum plastic wall; side-hole position and angle set by drawing datums

custom pps turning and milling parts

PPS Turned Datums and Milled Features

Combined turning and milling suits PPS parts with outside diameters and end faces alongside flats, slots and side holes. The Mazak i-100S provides turning, milling and drilling capabilities and a second spindle. When features are grouped within tool reach, multiple features can be completed in the same setup to reduce datum changes from machine transfers. Workholding and operation sequence depend on part geometry and clamping locations.

PPS Side Holes and Angular Reference

When the angle of a side hole or flat affects assembly, define its position relative to the rotational datum. For example, the lateral interface on a sensor mount must align with the installation direction, and a keyway must align with mating pins. Specify axial datums, hole positions and angular requirements on the drawing so that machining and inspection use the same datums.

PPS Cross-Hole Edges and Deburring

PPS is relatively brittle. Burrs or chips at cross-hole openings, slots and flat edges affect assembly and sealing. We can arrange cross-hole deburring and edge breaking of 0.1 mm. Specify surface texture by grade and functional face. Cleanliness standards and flow or sealing test requirements must be stated separately.

Precision PPS Turn-Milled Features

Applicable precision PPS feature dimensions can reach +/-0.005 mm, while shaft diameters and locating holes are +/-0.008 mm. These are dimensional tolerances. Side-hole position, angular orientation and coaxial relationships relative to the rotational axis must be defined separately against specified datums. Coaxiality for related turned features is 0.012 mm. Machined dimensions are accepted under agreed conditions, while fit at operating temperature requires assessment against grade data.

Specifications

Product Name Custom PPS CNC Turning and Milling Parts
Manufacturer XCM CNC
Factory Location Shenzhen, Guangdong, China
Quality System ISO 9001, ISO 13485, IATF 16949, GJB9001C
Machining Process CNC turn-milling of PPS rotary features, side holes and milled flats
Material PPS
Material Grade Specify PPS grade and GF/CF fill; no stock grade assumed
Tolerance +/-0.005 mm on precision features; +/-0.008 mm on shaft diameters and locating holes
Surface Treatment As-machined; deburring and edge breaking available; other treatments by grade and drawing review
Max Part Size Turning up to diameter 1250 mm at 2000 mm workpiece length; turn-milled combined part size depends on geometry, fixture and setup
Inspection Critical-dimension and geometric inspection; thread go/no-go gauge; CMM or FAI report by order requirements
Application PPS sensor mounts, fluid fittings, keyed connector insulators and thermal sensor adapters
Key Features Turned diameters and faces combined with milled flats, slots or cross holes; rotary datum and feature angle defined by drawing
Critical QC Requirements +/-0.005 mm on precision features; +/-0.008 mm on shaft diameters and locating holes; rotary datum and side-feature orientation inspected to drawing
MOQ 1 Piece
Typical Lead Time 10-15 business days after drawing review
Drawing Formats STEP, IGS, DWG, PDF, X_T

Applications

Sensor Mounts with Cross Holes

Sensor mounts with cross holes locate on their cylindrical outside diameters, while lateral interfaces must align with the installation direction. Side-hole position and angular orientation must therefore be checked against the outside-diameter datum. Combining turning and milling on the same part allows these relationships to be controlled from the same datums. PPS can be considered for installations with thermal cycling. Check temperature, vibration and fill grade against material data.

Fluid Fittings with Wrench Flats and Cross Ports

Fluid fittings with wrench flats and cross ports require turned threads and cylindrical sealing surfaces followed by milling of wrench flats and cross holes. Burrs at intersections affect flow passages and sealing, so deburring requirements must be explicit. PPS chemical resistance makes it a candidate for media-contact structures. Media, pressure and leak-test requirements must be specified separately.

Keyed Connector Insulators

The circular mating section and end face of keyed connector insulators are turned, while the keyway is milled. Keyway orientation determines connector insertion direction. PPS offers temperature resistance and dimensional stability. Flame-retardancy and insulation data must correspond to the selected grade and thickness. Carbon-fiber-filled grades are not assumed to be insulating.

Thermal Sensor Adapters

The axial bore, mounting face and fastening holes on thermal sensor adapters need defined relationships. The axial bore is turned, while the mounting face and fastening holes are milled. PPS temperature resistance and insulating properties can inform material selection, with actual loads and impact conditions affecting grade choice.

Why Choose Us

Quality Systems, Machining and Inspection Equipment

XCM CNC has ISO 9001, ISO 13485, IATF 16949 and GJB9001C quality systems, with machining equipment from brands including DMG, Mazak, Matsuura and Brother and dimensional inspection equipment. Turned and milled parts can be machined on the Mazak i-100S, which provides turning, milling and drilling capabilities and a second spindle.

Turning and Milling Support from Small Fittings to Large Structural Parts

We have machining equipment for parts ranging from small connectors to large structural components. PPS turned and milled parts can receive drilling, tapping, cross-hole deburring and sharp-edge removal. Large combined-feature parts are assessed against equipment ranges, fixtures and workholding arrangements.

Equipment Matched to PPS Precision Requirements

We use a four-tier equipment mix from mainland China, Taiwan, Japan, Europe and the United States, matching machines to part and operation precision requirements to balance machining quality and cost. Precision requirements for turned and milled parts depend on which features participate in fits. We select machines accordingly and apply an appropriate precision tier to general profile surfaces.

Inspection Linking Cylindrical Surfaces and Side Holes

We can use a CMM to check side-hole position and angular orientation, a roundness tester for cylindrical surfaces, and go/no-go gauges for threads. CMM reports or FAI first article reports in your format can be supplied to order. Clearly defined axial and angular datums allow inspection results to reflect the assembly relationships of fittings, sensor mounts or insulators directly.

Sample Interface Approval Before Batch Production

Orders start at one piece, with sample approval before batch production. Sample lead times are 3-7 days. Samples allow mating diameters, side-hole orientation and cross-hole edges to be checked before batch inspection requirements are finalized.

FAQ

When does a PPS part need both turning and milling?

Combined turning and milling suits parts with circular mating surfaces and non-cylindrical features such as side holes, flats or anti-rotation slots. Turning produces outside diameters, end faces and bores, while milling and drilling produce lateral features. Clearly define the positions and orientations of lateral features relative to the rotational datum on the drawing.

Can a PPS component be finished in one setup?

Turning, side holes and flats can be completed in one setup when the features are grouped at the same end and within tool reach. If the other end needs machining, the Mazak i-100S second spindle can continue the work. Clamping locations and fixture space determine whether this still qualifies as the same setup.

How do I define the relationship between a PPS bore and a side hole?

Define three separate requirements: hole diameter, side-hole position relative to the axis, and side-hole angular orientation around the axis. Each has its own acceptance method. Use an outside diameter or end face that actually locates the part during assembly as the datum so that inspection results reflect assembly relationships.

How are burrs at intersecting PPS holes handled?

Cross-hole deburring can be arranged. Specify internal-intersection burr limits and hole-entry chamfer requirements on the drawing. PPS is relatively brittle, and intersection edges may chip, so identify functional edges separately. If the part handles fluids or performs a sealing function, define cleanliness standards and leak testing separately.

What tolerances apply to combined turned and milled PPS features?

Applicable precision PPS feature dimensions can reach +/-0.005 mm, while shaft diameters and locating holes are +/-0.008 mm. These are dimensional tolerances. Side-hole position and angular orientation relative to cylindrical surfaces need separate datums and geometric requirements. Machined dimensions are accepted under inspection conditions, while fit at operating temperature requires assessment against grade data.

How can a prototype confirm a PPS turn-milled assembly?

Check the sample’s cylindrical mating surfaces, lateral interfaces and assembly orientation before arranging batch production following approval. The minimum order is one piece. Sample lead times are typically 3-7 days, and typical batch lead times are 10-15 days, depending on complexity and quantity.

Can an NDA cover drawings for a custom PPS connector?

Yes. An NDA can be signed on request. Provide 2D or 3D drawings, PPS grade and fill, quantity, critical interfaces and datum requirements with your inquiry. Supported formats include STEP, IGES, STP, DWG and dimensioned PDF.

Certified Quality ISO 9001 | ISO 13485 | GJB9001C | IATF:16949 View Quality Control & Inspection Proof

Request a CNC Machining Quote from XCM CNC

Send us your drawings. Our team will review the file and reply with a machining quote. MOQ: 1 piece, with competitive low-cost pricing.

Contact Form Demo 2

STEP, IGS, STL, DWG, DXF, PDF, JPG or ZIP. Max. 50 MB. Multiple or large files? Email: [email protected]

You May Also Like