CNC machining workshop
Custom PTFE CNC Turning and Milling Parts

Custom PTFE CNC Turning and Milling Parts

Material: PTFE MOQ: 1 piece Tolerance: +/-0.005 mm on precision features; +/-0.008 mm on locating holes and shaft diameters Lead Time: Prototype 3-7 days; production 10-15 days depending on complexity and quantity
Email: [email protected] | WhatsApp: +8618638951317

Overview

XCM CNC makes custom PTFE turn-mill parts with sealing diameters, wrench flats and side holes. Rotary and lateral features are machined to a common set of axis, end-face and angular datums. Turn-mill operations are primarily performed on a Mazak I-100S, with complex multi-face features machined on a DMG 80mono when needed. PTFE offers chemical resistance and low friction and is used for fluid fittings, valve cores and sealing adapters. The factory holds ISO 9001, ISO 13485, IATF 16949 and GJB9001C certifications. MOQ is one piece. Prototypes generally take 3-7 days and batch orders 10-15 days, depending on complexity and quantity.

custom ptfe turning and milling parts

Key Capabilities

PTFE turn-mill tolerances apply by feature: critical sealing diameters and locating holes use the stated values, while other dimensions follow the drawing’s general tolerances. The four sections below explain how those values apply to actual parts.

  • Materials: Virgin PTFE or specified filled PTFE grade; grade confirmed from order documentation
  • Tolerance: +/-0.005 mm on precision features; +/-0.008 mm for shaft diameters and locating holes
  • Surface Finish: Turned sealing diameters and mating faces; finish requirements depend on PTFE grade and sealing function
  • GD&T: Coaxiality of sealing diameters, perpendicularity of flats and position of side holes to axis, end-face and angular datums; CMM inspection
  • Max Size: Turning diameter 1250 x 2000 mm; 3-axis milling travel 3000 x 1600 x 1400 mm
  • Surface Treatment: Typically supplied as-machined; deburring and cleaning scope confirmed by order
  • Thread: M2 and above recommended for PTFE; NPT / BSP / G / PT pipe threads; go/no-go gauge inspection
  • Precision Limit: +/-0.005 mm on precision features; +/-0.008 mm on shaft diameters and locating holes (specific features, by drawing review)

custom ptfe turning and milling parts

PTFE Turn-Mill Machining of Sealing Diameters and Wrench Flats

The Mazak I-100S turn-mill center has a second spindle, so sealing diameters, wrench flats and end-face holes on a PTFE fitting can be made on one machine, reducing datum transfers. Sealing shaft diameters can be held to +/-0.008 mm; drawing-specified precision features to +/-0.005 mm. Small-diameter fittings and pins can be batch turned on Jingshang 80 automatic lathes.

PTFE Side-Hole and Cross-Hole Machining with Pipe Threads

Side holes and cross-holes are positioned from the part axis, end face and angular datum. Locating-hole size tolerance is +/-0.008 mm. PTFE can leave stringy burrs where passages meet; a standard chamfer tool may not remove them, so internal deburring is usually planned separately. A minimum 1.5 mm wall is recommended for plastic between holes and from a hole to the outside diameter. Ports can use NPT, BSP, G or PT pipe threads.

Large PTFE Turning and Milling Capacity

Large PTFE flanges, sealing rings and sleeves can be turned on a Shenyang CK61125X2000 CNC lathe up to diameter 1250 mm at a 2000 mm workpiece length. Flat faces, grooves and hole patterns in large PTFE plates and liners can be machined on a Qiao Feng 3016-4A center with 3000 x 1600 x 1400 mm travel. Large PTFE parts change size noticeably with temperature, so agree on inspection temperature with the customer.

PTFE Dimensional and Datum Inspection Equipment

Hole position, coaxiality and perpendicularity are measured on a Hexagon Inspector Classic 06.08.06 CMM. A WanHao Rational VMS-3020G 2.5D vision system checks contours and hole spacing on small fittings; a TRIMOS 600L height gauge rechecks vertical dimensions. Soft PTFE can measure differently while clamped, so critical sizes are checked after the part is released and has recovered. The +/-0.005 mm and +/-0.008 mm features are accepted in that state. If geometric tolerances are specified to ISO 1101, reports can reference the drawing datums directly.

Specifications

Product Name Custom PTFE CNC Turning and Milling Parts
Manufacturer XCM CNC
Factory Location Shenzhen, Guangdong, China
Quality System ISO 9001, ISO 13485, IATF 16949, GJB9001C
Machining Process CNC turning and milling
Material PTFE
Material Grade Virgin PTFE or specified filled grade; confirm from material documentation
Tolerance +/-0.005 mm on precision features; +/-0.008 mm on locating holes and shaft diameters
Surface Treatment As-machined; deburring and cleaning scope by order
Inspection Hexagon CMM, WanHao VMS-3020G video measuring, TRIMOS 600L height gauge; dimensional inspection report
Application Chemical-fluid connectors, valve components and sealing assemblies
Key Features Turned sealing diameters, milled flats, side holes, cross-holes and annular grooves
Critical QC Requirements Axis, end-face and angular datums; hole position, burr-removal scope and finished-part inspection
MOQ 1 piece
Typical Lead Time Prototype 3-7 days; production 10-15 days depending on complexity and quantity
Drawing Formats STEP, IGS, DWG, PDF, X_T

Applications

Chemical-fluid fittings and adapters

Typical parts: Connector fitting with wrench flats and a side hole, PTFE fluid adapter

Chemical piping fittings contact acidic or alkaline media, for which PTFE’s chemical resistance can be suitable. After turning the sealing diameter, we mill wrench flats. The port can have NPT, BSP, G or PT pipe threads.

Laboratory valve cores and flow splitters

Typical parts: Side-outlet valve core, small flow splitter

Reagent flow-path parts often use PTFE’s chemical resistance and nonstick surface. Turn-mill machining relates the axial bore and radial outlet to one datum system. A 2.5D vision system can inspect hole spacing on small valve cores.

Fluid connector sleeves for pharmaceutical equipment

Typical parts: Connector sleeve with mounting lug, fluid coupling

PTFE can be selected for sealed fluid connections in pharmaceutical equipment. Turning creates rotary mating faces; milling creates mounting lugs and holes. The customer provides contact media, cleaning requirements and material documents to verify material choice.

Pneumatic sealing adapters for industrial automation

Typical parts: Pneumatic adapter with locating flat, round fitting with angular mounting feature

A pneumatic adapter has both a circular sealing face and an angular locating flat, and can use PTFE’s low friction. A Mazak turn-mill center can machine the mating diameter and flat on one machine. For sustained loads, choose virgin or filled PTFE based on wear and creep conditions.

Why Choose Us

Quality systems and multi-process equipment

XCM CNC operates under ISO 9001, ISO 13485, IATF 16949 and GJB9001C quality systems, with DMG, Mazak, Matsuura and Brother equipment. For PTFE parts with sealing diameters, wrench flats and side holes, we inspect critical sizes and datum relationships to the drawing.

Turning, milling and port-edge processing coordinated

Turning produces rotary sealing faces; milling and drilling produce wrench flats, mounting faces and side holes. Cross-hole edge requirements can be stated on the drawing. Identifying features and acceptance targets before quoting helps coordinate work from rotary to angular datums.

Tiered equipment strategy for cost-controlled machining

XCM CNC has four equipment tiers from mainland China, Taiwan, Japan, Europe and the United States. General-tolerance PTFE profiles and planes go to domestic or Taiwanese machines; +/-0.005 mm class sealing diameters and locating holes go to imported machines such as DMG or Mazak. Matching equipment to actual precision needs controls cost while meeting the drawing.

Axis, end-face and angular relationships made inspectable

During quoting, we align on the axis, end-face and angular datums, and list hole-size and hole-position requirements separately. Reports follow those datums, directly relating results to sealing faces and mounting orientation and reducing acceptance disputes.

Approve multi-interface prototypes before batch production

A prototype verifies how the sealing diameter, wrench flats and side holes assemble. After customer approval, batch production follows the agreed material, critical datums and inspection items. An NDA can be signed before confidential drawings are supplied.

FAQ

When does a PTFE part need both turning and milling?

A part generally needs both processes when it has a turned sealing diameter plus wrench flats, side holes or mounting faces. Operation sequence and setup count depend on drawing features and tool access.

What is the MOQ and lead time for PTFE turned and milled parts?

MOQ is one PTFE turn-mill part. Prototypes generally take 3-7 days and batch orders 10-15 days, depending on complexity and quantity.

What files are needed for a PTFE machining quote, and can you sign an NDA?

Provide 2D/3D drawings, PTFE grade, tolerances, quantity and intended use. We accept STEP, IGES, STP, DWG and dimensioned PDF. An NDA can be signed before you send confidential drawings.

Which dimensions can use the confirmed plastic tolerances?

PTFE precision feature sizes can use +/-0.005 mm; shaft diameters and locating holes can use +/-0.008 mm. Identify applicable features on the drawing. Specify geometric requirements such as position and coaxiality separately from size tolerance.

How should PTFE grade and filling be specified for a connector?

Specify virgin or filled PTFE and provide the exact grade or material documentation. Medium, pressure, load and operating temperature help assess whether the grade suits the connector.

What inspection documents come with PTFE parts?

Each batch includes a dimensional inspection report. Critical hole locations and datum relationships can be measured and recorded on a CMM. Request first article reports or material certificates when ordering.

What payment, shipping and packaging options are available?

We accept T/T, PayPal and Western Union. Shipping options include DHL, FedEx, UPS and sea freight. Parts are packed with foam in cartons; wooden cases can be used for large or damage-prone parts.

Certified Quality ISO 9001 | ISO 13485 | GJB9001C | IATF:16949 View Quality Control & Inspection Proof

Request a CNC Machining Quote from XCM CNC

Send us your drawings. Our team will review the file and reply with a machining quote. MOQ: 1 piece, with competitive low-cost pricing.

Contact Form Demo 2

STEP, IGS, STL, DWG, DXF, PDF, JPG or ZIP. Max. 50 MB. Multiple or large files? Email: [email protected]

You May Also Like