CNC machining workshop
Custom Precision CNC-Milled PVC Parts

Custom Precision CNC-Milled PVC Parts

Material: PVC MOQ: 1 Piece Tolerance: +/-0.005 mm on precision features; +/-0.008 mm for locating holes and shaft diameters Lead Time: 10-15 business days after drawing review
Email: [email protected] | WhatsApp: +8618638951317

Overview

XCM CNC provides custom PVC CNC milling for plates with cavities, stepped mounting faces, counterbores and bolt-hole patterns, including chemical equipment mounting plates, filter covers and insulating fixture bases. PVC offers acid and alkali resistance and electrical insulation. Check actual media, temperature and loads against data for the selected grade. Orders start at one piece, with typical lead times of 10-15 days depending on part complexity and quantity. Precision-feature dimensional tolerances can reach +/-0.005 mm.

custom pvc cnc milled parts

Key Capabilities

  • Materials: PVC grades specified by drawing; confirm grade and material documents per order
  • Tolerance: +/-0.005 mm on precision features; +/-0.008 mm for shaft diameters and locating holes
  • Surface Finish: Ra 1.6-3.2 um reference for standard milled faces; Ra 0.8-1.6 um reference for optimized finishing faces; confirm by PVC grade and feature
  • GD&T: Flatness 0.02 mm on faces up to 1030 x 1030 mm; hole-pattern position 0.015 mm (rigid PVC grades); datums by drawing
  • Max Size: 3-axis machine travel: 3000 x 1600 x 1400 mm; parts around 2600 mm long depend on fixturing
  • Surface Treatment: Deburring and edge breaking per drawing (0.1 mm sharp-edge break available); metal finishes such as anodizing do not apply
  • Thread: Internal threads from M1.4 and external from M2.0, checked with go/no-go gauges; type and depth per drawing and PVC grade
  • Precision Limit: +/-0.005 mm on mating faces and small precision features; +/-0.008 mm on locating holes, held to drawing datums

custom pvc cnc milled parts

PVC Pockets and Stepped Mounting Faces

Milling produces cavities, recesses and stepped mounting faces in PVC plates to receive mating parts or raise mounting planes. Mounting-face flatness can be specified at 0.02 mm for machined areas no larger than 1030 x 1030 mm. Inside corners are limited by the end mill and are generally no smaller than R0.5 mm. Identify functional depths and required corner radii on the drawing so that tools and toolpaths can be planned.

Hole Patterns and Locating Holes in PVC

Machining bolt-hole patterns, counterbores and dowel holes from the same datum helps maintain consistent hole-to-hole positional relationships. Hole-pattern position tolerance can be specified at 0.015 mm, while locating-hole dimensions are +/-0.008 mm. Specify hole diameters and hole-pattern positions separately, along with inspection datums, so that both parties assess the same features at acceptance.

Thin-Wall PVC Panels

The minimum plastic wall thickness is 1.5 mm. Removing large areas of material from PVC plates releases stress, while cutting heat and clamping forces can also warp thin-wall zones. Plate spans, wall height, support locations and workholding therefore directly affect feasibility. For wide plates with bosses, identify the relationships between mounting faces, cavities and remaining wall thickness in the model.

Large-Format PVC Plates

Three-axis milling-machine travel is 3000 x 1600 x 1400 mm. Plates around 2600 mm long can be machined according to workholding conditions. The machinable range depends jointly on stock dimensions, clamping space and the areas to be machined. PVC has appreciable thermal expansion, so specify dimensional inspection conditions for large plates on the drawing.

Specifications

Product Name Custom Precision PVC CNC Milled Parts
Manufacturer XCM CNC
Factory Location Shenzhen, Guangdong, China
Quality System ISO 9001, ISO 13485, IATF 16949, GJB9001C
Machining Process CNC milling
Material PVC
Material Grade PVC grade specified by drawing; material certificate available per order
Tolerance +/-0.005 mm on precision features; +/-0.008 mm for locating holes and shaft diameters
Surface Roughness Ra 1.6-3.2 um reference for standard milled faces; Ra 0.8-1.6 um reference for optimized finishing faces; not a guaranteed value
Surface Treatment Deburring and edge breaking per drawing; metal finishes such as anodizing do not apply
Max Part Size 3-axis travel 3000 x 1600 x 1400 mm; parts around 2600 mm long depending on stock size and fixturing
Application Chemical equipment mounting plates, filter covers, electrical test fixture bases, plating-line guards
Key Features Milled mounting faces, pockets, steps, counterbores, hole patterns, locating holes, outer profiles
Critical QC Requirements Flatness of mounting faces, hole-pattern position and locating-hole size checked to drawing datums; CMM or FAI report available per order
MOQ 1 Piece
Typical Lead Time 10-15 business days after drawing review
Drawing Formats STEP, IGS, DWG, PDF, X_T

Applications

Mounting Plates for Chemical Tanks and Pump Assemblies

A Chemical Tank Mounting Plate or Pump Support Plate needs counterbores, bolt-hole patterns and stepped mounting faces aligned with equipment. Milling produces these features in the same PVC plate, with hole-pattern position tolerance specified at 0.015 mm. Media concentration, temperature, plate span and loads determine grade suitability and must be checked against grade documentation.

Filter Covers and Flange Cover Plates for Water Treatment

A Filter Cover or Piping Flange Cover mates with a housing or pipe through its profile, sealing-contact face and evenly spaced fastening holes. Contact-face flatness can be specified at 0.02 mm. Sealing performance also depends on the gasket, fastening force and media. State the pressure with your inquiry for pressure-bearing applications.

Electrical Test Fixture Bases

An Insulating Fixture Base or Test Probe Mounting Plate provides mounting datums for probes and fixtures. The relative positions of locating-hole patterns, counterbores and local steps are critical. Locating-hole dimensions can be specified at +/-0.008 mm. For PVC electrical insulation applications, establish flame-retardancy ratings and electrical properties from selected-grade documentation.

Tank-Side Guards for Plating Lines

A Tank-Side Splash Guard or Plating-Line Mounting Block has a large face with numerous fastening slots and through-holes. Milling produces outside profiles, fastening slots, mounting faces and through-holes. Stock dimensions and clamping locations determine the machining layout for large plates. Plating-solution composition and temperature determine PVC suitability.

Why Choose Us

Quality Certifications and Equipment Support

XCM CNC holds ISO 9001, ISO 13485, IATF 16949 and GJB9001C quality system certifications, with equipment from brands including DMG, Mazak, Matsuura and Brother. PVC plate material grades, drawing revisions and acceptance documentation can be agreed during quotation.

From Small Precision Parts to Large Plates

The same factory machines small precision components such as connector and sensor parts, as well as large structural parts around 2600 mm long. Precision features on small plastic parts under 100 mm can be specified at +/-0.005 mm. Large plates are planned according to their particular workholding arrangements.

Equipment Matched to Precision Requirements and Cost

We match machines from four equipment tiers covering mainland China, Taiwan, Japan, Europe and the United States to each operation’s precision requirements, balancing machining quality and cost. High-precision hole patterns and mounting faces on PVC plates can be planned separately from general material-removal areas.

Inspection Documentation Supplied to Order

Geometric tolerances such as flatness and position can be inspected using CMMs, height gauges and other equipment. CMM reports and FAI first article reports can be supplied to order in your report format. Inspection focuses on your specified mounting faces and hole-pattern datums.

Sample Approval Before Production

Samples typically take 3-7 days, allowing hole positions, steps and mounting relationships with mating parts to be checked before production following approval. For large plates, stock dimensions and clamping areas can be established during sampling, with the same datums retained for production.

FAQ

What tolerances apply to PVC pockets and locating holes?

PVC precision-feature dimensional tolerances can reach +/-0.005 mm, while locating-hole and shaft-diameter dimensions are +/-0.008 mm. Specify cavity depths, hole diameters and hole-pattern positions separately, with inspection datums. Apply the tightest tolerances only to assembly features to make quotation and acceptance clearer.

How thin can a milled PVC panel be?

The minimum plastic wall thickness is 1.5 mm. Feasibility depends on plate span, wall height, support and workholding. Stress release after extensive material removal may also warp a plate. Identify thin-wall zones and adjacent mounting features in the drawing or model.

How large can a PVC plate be machined?

Three-axis milling-machine travel is 3000 x 1600 x 1400 mm. Plates around 2600 mm long can be planned according to workholding. Final dimensions depend on stock shape, clamping space and the areas to be machined. Provide plate dimensions and machining scope with your inquiry.

What flatness can a milled PVC mounting face reach?

Mounting-face flatness on rigid PVC grades can be specified at 0.02 mm for machined areas no larger than 1030 x 1030 mm. Larger faces or very thin plates require separate assessment of support and workholding. Sealing faces also depend on gaskets, fastening force and media. Flatness alone does not guarantee sealing.

What inside corners should I allow in a milled PVC pocket?

Allow inside-corner radii compatible with the cutter radius. End-milled inside corners are generally no smaller than R0.5 mm, and deeper pockets typically need larger radii. Specify functional depths and acceptable inside-corner radii on the drawing.

How do I choose PVC or CPVC for a chemical panel?

Select the material against specific grade data for the actual media, concentration, temperature and loads. CPVC differs from PVC in temperature resistance and other properties and must be specified as a separate material. Also state any flame-retardancy ratings or regulatory documentation required by the project.

What information should I send for a PVC milling quote?

Provide 2D/3D drawings, PVC grade, quantity, critical tolerances and intended use. Identify important datums and appearance requirements. Files can be STEP, IGES, STP, DWG or a dimensioned PDF. Orders start at one piece. Samples typically take 3-7 days, and production typically takes 10-15 days. An NDA can be signed when confidentiality is needed.

Certified Quality ISO 9001 | ISO 13485 | GJB9001C | IATF:16949 View Quality Control & Inspection Proof

Request a CNC Machining Quote from XCM CNC

Send us your drawings. Our team will review the file and reply with a machining quote. MOQ: 1 piece, with competitive low-cost pricing.

Contact Form Demo 2

STEP, IGS, STL, DWG, DXF, PDF, JPG or ZIP. Max. 50 MB. Multiple or large files? Email: [email protected]

You May Also Like