
Custom CNC Turned and Milled PVC Parts
Overview
PVC connectors with side holes, mounting flats or radial ports combine cylindrical surfaces and non-cylindrical features. XCM CNC plans turning, milling and drilling according to part geometry. These structures can serve as chemical-resistant pipe fittings or insulating interfaces. Media, temperature and connection loads must be assessed for the selected PVC grade. Orders start at one piece, with typical lead times of 10-15 days depending on complexity and quantity.

Key Capabilities
- Materials: PVC grades specified by drawing; confirm grade and material documents per order
- Tolerance: +/-0.005 mm on precision features; +/-0.008 mm for shaft diameters and locating holes
- Surface Finish: As-machined Ra 1.6-3.2 um reference; confirm appearance and finish by feature and PVC grade
- GD&T: Datums for turned and milled features defined by drawing; report scope confirmed per order
- Max Size: Turning: up to diameter 1250 x 2000 mm; milling machine travel: 3000 x 1600 x 1400 mm. Combined-part size depends on geometry and setup
- Surface Treatment: By material and drawing review
- Thread: Thread standard, effective length and inspection per drawing and PVC grade
- Precision Limit: +/-0.005 mm on precision features; +/-0.008 mm on shaft and locating-hole diameters, held to drawing datums

PVC Round Bodies with Flats
Turning and milling combine a PVC cylindrical body with milled wrench flats or mounting faces in the same part. Turning produces cylindrical interfaces, while milling produces planar features for locating or securing the connector.
PVC Cross-Holes and Ports
PVC connectors can include radial ports connected to an axial bore. Define hole-position relationships and internal edge requirements on the drawing. Tool access at intersections, internal burr control and the scope of cleaning depend on part geometry and order requirements.
PVC Feature Relationships
Once the drawing defines the feature relationships, turned outside diameters and end faces can serve as datums for milling mounting holes or lateral features. First article reports can record selected outside diameters, end faces and side-hole dimensions against the specified datums.
PVC Wall Sections at Intersections
Plastic walls can be machined to 1.5 mm. Remaining wall thickness around cross holes or shoulders depends on local geometry and workholding. Identify minimum wall thickness, hole intersections and support faces so that machining and inspection of the connector body can be planned.
Specifications
| Product Name | Custom PVC CNC Turning and Milling Parts |
|---|---|
| Manufacturer | XCM CNC |
| Factory Location | Shenzhen, Guangdong, China |
| Quality System | ISO 9001, ISO 13485, IATF 16949, GJB9001C |
| Machining Process | CNC turning, milling, and drilling as required by part geometry |
| Material | PVC |
| Material Grade | PVC grade specified by drawing; confirm material documents per order |
| Tolerance | +/-0.005 mm on precision features; +/-0.008 mm for shaft diameters and locating holes |
| Surface Treatment | By material and drawing review |
| Max Part Size | Turning up to 1250 mm diameter x 2000 mm length; combined turn-milled size depends on part geometry and setup |
| Application | Chemical-line connectors, water-treatment ports, and electrical insulating mounts |
| Key Features | Turned bodies combined with milled flats, radial ports, axial bores, and mounting features |
| Critical QC Requirements | Check turned-to-milled feature relationships, hole intersections, datums, and order-specific report scope |
| MOQ | 1 Piece |
| Typical Lead Time | 10-15 business days after drawing review |
| Drawing Formats | STEP, IGS, DWG, PDF, X_T |
Applications
Water Treatment Side-Port Connectors
Typical parts: Side-Port Pipe Connector, Filter Branch Fitting
A connector joins a pipe through a cylindrical interface and connects a side branch through a radial hole. Turning and milling coordinate inside and outside diameters, end faces and side-hole positions in the same part. PVC suitability for fluid contact depends on the grade, media, concentration, temperature, pressure and sealing requirements.
Chemical Fittings with Wrench Flats
Typical parts: Threaded Adapter Fitting, Hexagonal Wrench-Flat Fitting
Fitting threads and sealing end faces are cylindrical features, while wrench flats must be machined in relation to their orientation and assembly space. PVC is a candidate for chemical-resistant components, with suitability depending on the chemical solution composition, temperature, connection loads and material grade.
Sensor Mounts with Mounting Ears
Typical parts: Cylindrical Sensor Mount, Mounting-Ear Sensor Bracket with twin ears
The center bore or cylindrical locating surface of a sensor mount must maintain assembly relationships with lateral mounting ears and threaded holes. These parts suit machining that combines turning datums with milled side features. If the equipment environment includes cleaning agents or chemical media, verify compatibility for the PVC grade and contact conditions, and define mounting clamp loads.
Insulating Cable Exit Housings
Typical parts: Cylindrical Cable Exit Insulator, Side-Entry Terminal Holder
An axial through-hole intersects a radial cable-exit hole, while the outside diameter and end face locate the part during installation. Combined turning and milling handles these related features. Establish the insulating application and actual operating conditions from PVC grade documentation and equipment electrical requirements.
Why Choose Us
Quality Certifications and Turn-Mill Equipment Support
XCM CNC holds ISO 9001, ISO 13485, IATF 16949 and GJB9001C quality system certifications, with equipment from brands including DMG, Mazak, Matsuura and Brother. For PVC connectors with cylindrical bodies and lateral mounting features, specify datums and assembly relationships during quotation.
Coordinated Machining of Cylindrical Surfaces and Lateral Features
The Mazak i-100S turn-mill center provides turning, milling and drilling capabilities and a second spindle. It can be used to plan cylindrical surfaces, side holes, wrench flats and mounting slots on PVC interfaces. The operation sequence depends on part geometry, workholding and tool access.
Equipment Selected for Precision Requirements
We match equipment tiers from mainland China, Taiwan, Japan, Europe and the United States to operations with different precision requirements, balancing machining quality and cost. Specify cylindrical fit dimensions and spatial relationships between side holes and flats separately on the drawing to establish machining and inspection priorities.
Inspection of Side Features Against Rotational Datums
For PVC parts with radial holes or mounting flats, we can check side-hole relationships to the axis, flat orientation and intersection positions against the drawing. Critical-dimension or CMM reports can be supplied to order. Report items are based on your specified datums and assembly requirements.
Samples to Verify Turning and Milling Relationships
Samples allow assembly relationships between cylindrical surfaces and lateral interfaces to be checked before production following approval. For cross-hole structures, specify internal burr and cleaning scope in the sample requirements, with inspection content defined by the drawing and order.
FAQ
How should I relate a PVC part’s side holes to its turned diameter?
Define the axis, side-hole positions and assembly datums on the drawing, and specify positional requirements between side holes and mating outside diameters or bores. Hole diameters and hole-pattern positions can be specified separately to establish the inspection basis for each.
Can a PVC turn-milled part be completed in one setup?
Whether setups can be reduced depends on side-feature orientation, workholding and tool access. The Mazak i-100S has a second spindle to support combined turning and milling. The specific operation sequence depends on the part drawing.
What should I specify for wrench flats on a PVC fitting?
Specify flat width, orientation angle and datum relationships to the thread axis or sealing end face. If the wrench flats need clearance from adjacent interfaces, provide assembly space information or a mating-part model.
How do I define a side port that intersects a PVC bore?
Specify the main-bore and side-hole intersection position, diameters, effective depths and deburring requirements, and describe the flow-path or connection function. Internal-intersection and cleaning requirements depend on the specific geometry and material grade.
What dimensional tolerance applies to a PVC fitting’s mating diameter?
PVC shaft-diameter dimensions can reach +/-0.008 mm, while other precision features can reach +/-0.005 mm. Specify fit dimensions and positional requirements separately, with the corresponding drawing datums.
How should I assess PVC for a chemical or fluid connector?
Material selection depends on the specific PVC grade, media composition, concentration, temperature, pressure and sealing requirements. Provide the actual contact media and operating conditions so that the relevant grade data can be checked.
Can I approve a turn-milled sample before production?
Yes. Samples typically take 3-7 days, with production following sample approval. Samples allow the fit relationships between side holes, flats and cylindrical interfaces to be checked. Timing depends on structural complexity and order quantity.
What should I include in a quote request for a PVC turn-milled part?
Provide 2D/3D drawings, PVC grade, quantity, critical tolerances, threads and intended use. Define the requirements for lateral features relative to rotational datums. Files can be STEP, IGES, STP, DWG or a dimensioned PDF. An NDA can be signed on request.
Request a CNC Machining Quote from XCM CNC
Send us your drawings. Our team will review the file and reply with a machining quote. MOQ: 1 piece, with competitive low-cost pricing.



