Overview
XCM CNC organizes Nylon and PA machining supply around material sourcing, machine matching, and batch consistency for wear-resistant transmission, guide, and low-noise structural parts. The drawing review confirms the common PA project direction before production starts.
For wear resistance, self-lubrication, toughness, and the needs of gears, sliders, and bushings, the engineering review covers moisture compensation, reinspection, and fit-surface protection before switching from samples into repeat orders.
Key Capabilities
- Materials: PA6, PA66, MC Nylon, glass-filled Nylon by drawing review
- Tolerance: +/-0.03 mm standard (non-reinforced PA6/PA66), +/-0.005 mm selected critical features by drawing review
- Surface Finish: Ra 3.2 um milled, Ra 1.6 um precision milled, Ra 1.6-2.5 um turned
- GD&T: Coaxiality 0.012 mm, runout 0.01 mm, cylindricity 0.011 mm for selected features by drawing review
- Max Size: Milling 3000 x 1600 x 1400 mm, turning diameter 1250 x 2000 mm
- Surface Treatment: Deburring, edge smoothing, moisture-conditioning review, or marking by drawing review
- Thread: M2-M220, NPT, BSP, G, PT. M1.4 is not recommended for PA because of edge-breakage risk.
- Batch Range: 1 piece to repeat production, with a standard lead time of 10-15 days
Nylon Equipment Capacity for China Factory Supply
Nylon China-factory scheduling can cover 3000 x 1600 x 1400 mm milling travel and diameter 1250 x 2000 mm turning capacity for large guide rails, conveyor wear strips, and structural brackets. For large guides, conveyor wear parts, and support structures, scheduling first confirms machine travel, fixturing layout, and staged production rhythm before assigning the 10-15 day standard route or the 3-7 day sample route.
Nylon Material-Lot Routing for Repeat Orders
Nylon batch routing can separate 3-7 day sample validation from repeat production while maintaining material-lot traceability and inspection records. When repeat orders involve PA6, PA66, MC Nylon, or glass-filled grade changes, the routing can keep batch records, moisture-compensation allowance, and reinspection of critical fit faces inside the same delivery sequence.
PA Surface Protection for Export Shipments
PA export parts can reserve Ra 1.6 um mating faces and 0.012 mm coaxiality before edge smoothing and packing protection. For gears, sliders, bushings, and transmission worm wheels, batch shipment confirms isolated packing, moisture protection, and transport restraint against the location of the critical fit faces.
PA Repeat-Order Inspection Stability
PA repeat orders can maintain selected +/-0.005 mm critical features and Ra 1.6-2.5 um turned bores when the drawing defines the inspection datum and surface requirement. Precision gears, wear sliders, and guide structures can keep inspection aligned through CMM, FAI, and material records while matching the first-sample baseline.
Specifications
| Product Name | China Nylon (PA) CNC Machined Parts Factory |
|---|---|
| Manufacturer | XCM CNC |
| Factory Location | Shenzhen, Guangdong, China |
| Quality System | ISO 9001, ISO 13485, IATF 16949, GJB9001C |
| Machining Process | CNC machining |
| Material | Nylon (PA) |
| Material Grade | PA6, PA66, MC Nylon, glass-filled Nylon by drawing review |
| Tolerance | +/-0.03 mm standard (non-reinforced PA6/PA66) |
| Precision Tolerance | +/-0.005 mm selected critical features by drawing review |
| Surface Roughness | Ra 3.2 um milled, Ra 1.6 um precision milled, Ra 1.6-2.5 um turned |
| Surface Treatment | Deburring, edge smoothing, moisture-conditioning review, or marking by drawing review |
| Max Part Size | Milling 3000 x 1600 x 1400 mm / Turning diameter 1250 x 2000 mm |
| Inspection | CMM, roundness tester, height gauge, roughness tester, thread gauges |
| Application | Packaging guide parts, textile motion components, conveyor wear strips |
| Typical Application | China supply projects for nylon motion parts |
| Key Features | Wear-resistant PA machining, material-lot routing, moisture-compensation review, repeat-order stability |
| Critical QC Requirements | Material traceability, moisture-expansion review, tooth-profile inspection, fit-surface check, post-process reinspection |
| Batch Range | 1 piece to repeat production lots |
| MOQ | 1 Piece |
| Typical Lead Time | 10-15 business days after drawing review |
| Drawing Formats | STEP, IGS, DWG, PDF, X_T |
| Secondary Process | Deburring, edge smoothing, moisture-conditioning review, marking, and post-machining reinspection |
| Material Certificate | Material certificate by order requirements |
| Material Feature | Wear-resistant polymer, low-noise motion parts, moisture-compensation review |
| Assembly Features | Gears, sliders, bushings, guide rails, and low-noise transmission features by drawing review |
Applications
PA Gears and Worm Gears for Repeat Supply
Typical Parts: Plastic gear, worm gear, transmission bushing
Repeat orders for PA gears, worm gears, and bushings can organize material-lot traceability, moisture compensation, and critical fit-face inspection together. Gear teeth, shaft bores, and meshing faces can keep grade records, surface checks, and isolated protection inside one delivery rhythm, subject to the drawing and order.
Textile Guides and Sliders in Batch Production
Typical Parts: Yarn guide, wear slider, cam
Batch machining of PA yarn guides, sliders, and cams can use the 3000 mm milling range and diameter 1250 mm turning capacity to match machine loading and staged production. Guide grooves, sliding faces, and cam profiles can organize roughing, stabilization, finishing, and reinspection inside the 10-15 day standard route, subject to the drawing.
Food-Equipment Rails and Chain Plates for Export
Typical Parts: Wear guide rail, chain plate, guide part
Export orders for PA guide rails, chain plates, and guide parts can combine fit-surface protection, isolated packing, and moisture control in one delivery plan. Rail mating faces, chain-plate holes, and guide grooves can keep edge protection, transport restraint, and material records aligned inside the export package, subject to customer standards.
Conveyor Wear Parts in Repeat Orders
Typical Parts: Conveyor slide rail, guide strip, sprocket
Repeat orders for PA slide rails, guide strips, and sprockets can keep the batch consistent with the inspection baseline set by the first sample. Rail groove faces, guide edges, and sprocket bores can organize material-lot traceability, sampling checks, and CMM records in one quality route, subject to order requirements.
Why Choose Us
Certified Quality System and Nylon Machining Coverage
XCM CNC organizes Nylon and PA projects under ISO 9001, ISO 13485, IATF 16949, and GJB9001C aligned quality processes, with DMG, Mazak, Matsuura, and Brother equipment supporting turning, milling, and wear-resistant transmission parts. PA6, PA66, MC Nylon, and glass-filled projects can review moisture compensation, gear precision, and wear-surface requirements during drawing review.
Size Range from Small Connectors to Large Wear Structures
The machining range covers small connector-scale parts, PA gears, sliders, bushings, low-noise transmission parts, larger guide rails, conveyor wear parts, and metal-replacement weight-saving structures. Milling travel reaches 3000 x 1600 x 1400 mm and turning capacity reaches diameter 1250 x 2000 mm, subject to fixturing, moisture compensation, material grade, and fit requirements.
Tiered Equipment Strategy for Low-Cost CNC Machining, Quality-Assured Production
XCM CNC uses four equipment tiers from mainland China, Taiwan, Japan, Europe, and the US. Standard-tolerance operations can run on domestic or Taiwan equipment, while higher-precision features move to imported machines such as DMG and Mazak. Equipment is matched to actual tolerance needs so cost stays aligned with the drawing.
Material-Lot Traceability System
PA grade, material lot, and reinforced or food-grade requirements can be linked by order to specific parts and inspection records, which supports repeat supply of wear-resistant components. For gear, slider, and guide projects, the delivery file can define material certificates, surface-condition confirmation, and the sampling scope.
Stable Repeat-Order Scheduling
Wear gears, rails, and guide components can be scheduled through rough machining, stabilization, finish machining, and reinspection to reduce waiting and rework between batches. Repeat orders also keep grade changes, machine matching, and critical-dimension checks in the same delivery rhythm while staying aligned with the first-sample baseline.
FAQ
What batch range can your China factory handle for Nylon parts?
The factory can start from MOQ 1 piece and also support repeat-production batches. Standard production lead time is usually 10-15 days and the sample route is usually 3-7 days, while batch size, scheduling, and machine matching still depend on geometry and order quantity.
How do you organize lead time for Nylon repeat orders?
Repeat orders can be scheduled through rough machining, stabilization, finish machining, and reinspection, with the standard route usually staying inside 10-15 days. If the order changes grade, adds glass-filled material, or uses larger structures, material arrival and machine matching are confirmed first at order entry.
How do you maintain material traceability for Nylon batches?
PA grade, material lot, and reinforcement level can be linked by order to specific parts and inspection records. Material certificates, CMM reports, and FAI records can also be supplied by customer requirement to support batch-consistency verification.
What packing protection do you provide for export Nylon parts?
PA transmission parts and fit components can combine reinspection, isolated packing, and moisture protection in one delivery route. The exact packing method, such as foam, carton, or wood-crate protection, still depends on fit-face location, transport route, and customer acceptance requirements.
How precise can CNC machined Nylon gears or wear parts be?
PA gears, sliders, and fit faces can be evaluated against reference capabilities such as 0.02 mm flatness, 0.015 mm position tolerance, and 0.01 mm hole position on selected features. Whether those values apply to a given part still depends on the grade, moisture behavior, and inspection method.
What Nylon parts does your factory usually machine for supply?
Common PA supply projects include gears, sliders, bushings, guide strips, conveyor wear parts, and textile-machine guide elements. Batch release still needs confirmation of the material grade, lot, fit faces, and packing-protection requirements.
Request a CNC Machining Quote from XCM CNC
Send us your drawings. Our team will review the file and reply with a machining quote. MOQ: 1 piece, with competitive low-cost pricing.
Email: [email protected] | WhatsApp: +8618638951317
