
Custom Precision Acetal (POM) 5-Axis Machined Parts
Overview
XCM CNC uses 5-axis and 3+2 processes for custom Acetal (POM) gripper fingertips, irregular locating fixtures, connector guides, and parts with angled holes or multi-direction mounting faces. We select the machining route from the 3D model, datums and fixture orientation. Specified precision features can reach +/-0.005 mm size tolerance. MOQ is one piece; typical lead time is 10-15 days, depending on complexity and quantity.

Key Capabilities
- Materials: Acetal (POM), including POM-C and POM-H by specified grade
- Tolerance: +/-0.005 mm on precision features; +/-0.008 mm for shaft diameters and locating holes
- Surface Finish: Machined contact surfaces; finish requirements depend on grade and function
- GD&T: Curved-surface profile evaluated against the 3D model, datum scheme, and CMM plan
- Max Size: Five-axis machining range 800 x 600 x 900 mm; usable part size depends on fixture and part orientation
- Surface Treatment: Machined finish with 0.1 mm edge breaking; other requirements by material and drawing
- Thread: Internal threads from M1.4 and external threads from M2.0; thread type and depth by drawing, gauge inspection available
- Precision Limit: Angled holes and multi-face features machined in one clamping where tool access allows; 1.5 mm minimum wall for plastic

POM Curved Contact Profiles on Five-Axis Parts
Gripper fingertips and guide fingers have contoured contact faces plus side mounting holes and locating faces. Five-axis machining adjusts orientation for tool access and reduces datum transfers from reclamping. The +/-0.005 mm value is a size tolerance for specified precision features; the curved profile is accepted separately against the 3D model, datums and inspection plan.
Acetal Angled Holes and Multi-Directional Tool Access
Machining angled holes and intersecting faces in one setup depends on whether the tool can approach along the hole axis while clearing surrounding contours and fixtures. We select 5-axis positioning or a 3+2 route from the model. Angled pin or locating holes can reach +/-0.008 mm diameter tolerance. Specify their axis direction and exit position against common datums.
Clamping Acetal Parts in Five-Axis Fixtures
Excessive clamping or accumulated cutting heat can elastically distort unsupported contours and thin POM walls, which may spring back after release. Mark permitted clamp zones and protected contact contours on the model so fixtures avoid critical faces. The 5-axis range is 800 x 600 x 900 mm; actual fixture capacity also depends on orientation and geometry.
CMM Inspection of Curved Acetal Profiles
Before comparing a curved profile on a CMM, agree on datum alignment and measurement area. Identify critical contact regions, clamp zones and multi-direction features on the drawing. Specify roughness and appearance of sliding faces separately. Low friction is a material property and does not replace those surface requirements.
Specifications
| Product Name | Custom Precision Acetal 5-Axis Machined Parts |
|---|---|
| Manufacturer | XCM CNC |
| Factory Location | Shenzhen, Guangdong, China |
| Quality System | ISO 9001, ISO 13485, IATF 16949, GJB9001C |
| Machining Process | 5-axis CNC machining or 3+2 machining by drawing review |
| Material | Acetal (POM) |
| Material Grade | POM-C or POM-H as specified on the drawing and verified against material documentation |
| Precision Tolerance | +/-0.005 mm on precision features; +/-0.008 mm on shaft diameters and locating holes |
| Surface Treatment | Machined finish with 0.1 mm edge breaking; curved contact-face finish specified separately |
| Application | Curved robotic gripper fingers, fixtures with angled holes and multi-direction locating faces, connector guides and insulating supports, curved guides and cams for drug-delivery equipment |
| Key Features | Freeform contact profiles, angled holes, multi-directional faces, planned clamp zones and tool access |
| Critical QC Requirements | Profile evaluated against the 3D model and CMM plan, with datums and clamp zones identified; report scope by order requirements |
| MOQ | 1 Piece |
| Typical Lead Time | 10-15 days, depending on part complexity and order quantity |
| Drawing Formats | STEP, IGS, DWG, PDF, X_T |
Applications
Contoured robotic gripper fingertips
Robotic gripper fingertips and contoured jaws have 3D contact faces conforming to the product and side mounting holes. Machinable POM has suitable rigidity for contact fingertips. Five-axis machining keeps contour and mount referenced to the same datums. Grade and wall thickness follow gripping load and contact-face requirements.
Irregular locating fixtures with angled holes
Multi-direction locators and angled-hole fixtures position workpieces from faces in different orientations. The spatial relationship of holes to locating faces affects repeatability. Dimensionally stable POM suits fixtures assembled and removed repeatedly. Supply a 3D model and common datums for machining and inspection.
Complex connector guides
Connector guides and profiled insulating supports direct mating components into position, with slots, mounting faces and curved guides in different directions. POM can serve as insulating support; electrical and flame ratings must be checked against the specified grade data. Five-axis machining can reduce setups for these features.
Contoured guides for drug-delivery equipment
Contoured guides and drive cams contact mating parts during motion, where POM’s low friction can help. Five-axis machining forms curved profiles and multi-direction mounting features. Assess the specific use, material and cleaning requirements against the drawing and project needs.
Why Choose Us
Quality systems, 5-axis and CMM equipment
XCM CNC operates under ISO 9001, ISO 13485, IATF 16949 and GJB9001C quality systems. DMG 5-axis, Mazak, Matsuura and Brother machines, with a Hexagon CMM, support machining and inspection of curved guides and irregular locators.
Machining from small connectors to large structures
Our scope covers small connector parts through large structures. Curved, angled-hole and multi-face parts use dedicated 5-axis equipment or a 3+2 route chosen from the model. Fixtures and orientation depend on part shape.
Equipment matched to precision, quality and cost
We choose equipment from mainland China, Taiwan, Japan, Europe and the United States by operation precision. Curved profiles and angled holes receive appropriate machines, while ordinary mounting features need not occupy the highest-precision resources.
Inspection records for curved parts
CMM reports are available by order, as are FAI reports for new projects in the customer’s format. Datum alignment and measurement area can be confirmed on the first article and applied to subsequent inspections.
Prototype approval and drawing confidentiality
Prototypes typically take 3-7 days, with production scheduled after approval. If contours or datums change after sampling, the approved model and drawing revision govern later production. An NDA can be signed for confidential models and drawings.
FAQ
When is five-axis machining useful for an Acetal part?
Consider 3+2 or 5-axis machining when contours, angled holes or multi-direction faces require a particular tool approach. If ordinary milling can reach the geometry, use that route. The model and fixture orientation determine the process.
Which 3D model and datum data are needed for a POM curved profile?
Supply a STEP or other 3D model, and mark contour datums, critical contact areas and profile acceptance requirements on the 2D drawing. Agree on profile value and measurement extent with the model and CMM plan.
How should angled holes be dimensioned on a curved guide?
Mark hole-axis direction and position relative to the contour or mounting datum, plus acceptance at the entrance and intersection. Pin or locating holes can reach +/-0.008 mm diameter tolerance.
Where should clamping areas be marked on an irregular POM part?
Mark allowed clamping areas and protected contact contours and machined features on the model or drawing. The 5-axis range is 800 x 600 x 900 mm, but usable size depends on fixture, orientation and geometry.
How is a machined POM profile accepted?
Dimensions are accepted against drawing datums and the agreed inspection method. Curved profiles are compared with the 3D model on a CMM within an agreed area. In-service dimensional stability also depends on temperature and load; state operating temperature when requesting a quote.
Does low friction determine the finish of a POM guide surface?
No. Low friction helps material selection but cannot replace functional roughness or appearance requirements. State separate criteria for curved contact regions and ordinary machined faces.
Can a prototype with revised curves move into repeat production?
Yes. MOQ is one piece. Prototypes typically take 3-7 days and production 10-15 days, depending on complexity and quantity. After changes to curves or datums, use the approved model and drawing revision for subsequent production.
What files should I send for a five-axis Acetal quote?
Send a 3D model in STEP, IGES or STP, dimensioned 2D drawings in DWG or PDF, grade, quantity, profile acceptance and clamping restrictions. State any required CMM or report format.
Request a CNC Machining Quote from XCM CNC
Send us your drawings. Our team will review the file and reply with a machining quote. MOQ: 1 piece, with competitive low-cost pricing.



