
Custom Precision Acetal (POM) CNC Turned Parts
Overview
XCM CNC precision turns Acetal (POM) bushings, guide rollers, stepped locating pins and insulating spacers. Outside diameters, bores, shoulders and end faces are machined for assembly fits. Specified precision features can reach +/-0.005 mm size tolerance and mating shaft diameters +/-0.008 mm. POM-C or POM-H is selected according to temperature, load and contact medium. MOQ is one piece; typical lead time is 10-15 days, depending on complexity and quantity.

Key Capabilities
- Materials: Acetal homopolymer (POM-H) and copolymer (POM-C), by specified grade
- Tolerance: +/-0.005 mm on precision features; +/-0.008 mm for shaft diameters
- Surface Finish: Turned contact surfaces and bores; finish requirement set per feature by grade and function
- GD&T: Runout and coaxiality of turned diameters, bores and end faces, referenced to a datum axis defined on the drawing
- Max Size: Turning diameter up to 1200 mm (1250 mm at 2000 mm length); turning length up to 2000 mm
- Surface Treatment: As-machined finish with sharp edges broken to 0.1 mm
- Thread: Internal threads from M1.4 and external threads from M2.0; thread size, depth and gauge inspection per drawing
- Precision Limit: Plastic minimum wall 1.5 mm; +/-0.005 mm precision features on parts under 100 mm

POM Stepped Shaft Diameters and Bore Fits
Bores, outside diameters and shoulders on bushings and guide rollers should remain coaxial for smooth rotation or sliding after assembly. Turning uses a common rotary axis for bores, diameters and end faces. Mating shaft sizes can reach +/-0.008 mm and specified precision features +/-0.005 mm. Identify mating parts and inspection method on the drawing; bore tolerance follows the drawing.
Acetal Thin-Wall Bushing Clamping and Free-State Size
A thin bushing may be squeezed oval in a chuck and spring back after release. Wall thickness, unsupported length and clamp location must be considered together. Minimum plastic wall capability is 1.5 mm, subject to wall height, grade and workholding. State whether sizes are accepted free or under a specified clamping condition.
POM Annular Grooves, Threads, and Functional Edges
Annular grooves, circlip grooves and threaded ends often adjoin mating diameters or end faces; dimension them from those functional surfaces. Minimum internal thread is M1.4 and minimum external thread M2.0. Functional threads are checked with go/no-go or thread ring gauges; grade and feature govern thread size and effective depth. Mark burr limits near grooves, threads and mating faces; sharp edges can be broken by 0.1 mm.
Acetal Long Shaft Support, Datums and Inspection
Long POM shafts are less rigid than metal and may need steady-rest support during turning to prevent slender sections bending under force. Maximum turning length is 2000 mm. Define inspection datums from the assembly axis so outside diameter, end-face and runout checks reflect the fit. Roundness instruments or CMMs can measure them. Specify runout value and datum for review against part length and inspection method.
Specifications
| Product Name | Custom Precision Acetal CNC Turned Parts |
|---|---|
| Manufacturer | XCM CNC (Shenzhen Xinchuangmeng Co., Ltd) |
| Factory Location | Shenzhen, Guangdong, China |
| Quality System | ISO 9001, ISO 13485, IATF 16949, GJB9001C |
| Machining Process | CNC turning |
| Material | Acetal (POM) |
| Material Grade | POM-H or POM-C grade as specified; verify against material documentation |
| Tolerance | +/-0.005 mm on precision features; +/-0.008 mm for shaft diameters |
| Surface Treatment | As-machined finish with sharp edges broken to 0.1 mm; specify finish separately for mating outside diameters, bores and grooves |
| Max Part Size | Turning diameter up to 1200 mm (1250 mm at 2000 mm length); turning length up to 2000 mm |
| Inspection | Dimensional inspection; CMM, roundness tester and thread go/no-go gauges as required; CMM and FAI reports by order |
| Application | Guide rollers and low-friction bushings, stepped locating pins and guide sleeves, insulating spacers and round insulating sleeves, cylindrical valve spools and seat rings |
| Key Features | Concentric bores and outside diameters, stepped shafts, end faces and annular grooves referenced to the turning axis |
| Critical QC Requirements | Shaft-diameter dimensions and mating fits, end-face and radial datums, and thin-sleeve free-state condition; report scope by order requirements |
| MOQ | 1 piece |
| Typical Lead Time | 10-15 days, subject to part complexity and order quantity; prototypes 3-7 days |
| Drawing Formats | STEP, IGES, STP, DWG, PDF with dimensions |
Applications
Conveyor guide rollers and bushings
Guide rollers and low-friction bushings slide against shafts or rails. POM’s low friction suits these positions. Turning makes outside diameters, bores and end faces; coaxiality affects smooth rotation. Identify mating part, load and rotational speed when selecting the design.
Stepped locating pins and guide sleeves
Stepped locating pins and guide sleeves are repeatedly inserted and removed from fixtures. Dimensionally stable POM can be turned into stepped shafts, end faces and bores. Define the common axis datum and fit clearance on the drawing.
Electronic insulating spacers
Insulating spacers and round sleeves separate and support electronic components. POM can be used if the specified grade meets electrical requirements; insulation and flame ratings follow material data. Turning forms coaxial diameters, axial holes and end faces.
Pump and valve spools and seat rings
Cylindrical valve spools and seat rings have reciprocating sliding fits where POM’s low friction can help. Turning makes spool diameters, seat bores and annular grooves. Check medium, temperature and sealing-face requirements against the application.
Why Choose Us
Quality systems and equipment
XCM CNC operates under ISO 9001, ISO 13485, IATF 16949 and GJB9001C quality systems. DMG, Mazak, Matsuura and Brother equipment plus a Hexagon CMM support machining and inspection of POM bushings, rollers and stepped shafts within one system.
Turning diameters, bores and end features
From small bushings to longer shafts, we can turn outside diameters, bores, end faces, shoulders, grooves and threads. Maximum diameter is 1200 mm and maximum length 2000 mm. A Mazak i-100S turn-mill center with a second spindle can handle complex parts with two-end or side features.
Equipment matched to precision, quality and cost
We assign equipment from mainland China, Taiwan, Japan, Europe and the United States according to part and operation tolerances. Mating shaft diameters and bores receive resources proportionate to their requirements, distinct from general profile surfaces.
Fit dimensions tied to inspection datums
For POM bushings and guide rollers, inspection datums can be defined around mating shaft diameters, bores, end faces and runout. Roundness instruments check roundness and go/no-go gauges check threads. CMM or first article inspection (FAI) reports can be supplied by order to relate measurements to assembly use.
Production after sample approval
MOQ is one piece and prototypes typically take 3-7 days. A prototype can be trial fitted to confirm fit and grade before batch production is scheduled.
FAQ
How should POM shaft diameters and mating bores be specified?
Dimension shaft and bore sizes and their fit separately, and specify measurement datums and acceptance. POM mating shaft size can reach +/-0.008 mm and specified precision features +/-0.005 mm. Bore tolerance follows the drawing and inspection conditions.
How does clamping affect a thin-wall Acetal bushing?
Thin sleeves can measure differently while clamped and after release. Mark wall thickness, length, clamp area and whether acceptance is in a free or clamped state. Minimum plastic wall capability is 1.5 mm, subject to height, geometry and workholding.
Which datum should control runout on a POM stepped shaft?
Normally use the actual mating axis as the datum and define how the end face and other rotary features relate to it. Specify runout value on the drawing; we review it against length, workholding and inspection method.
Can turned Acetal parts include grooves and threads?
Yes. Annular grooves and threads can be machined to the drawing. Minimum internal thread is M1.4 and external thread M2.0. State functional dimensions, effective thread depth and required go/no-go or thread ring gauging; exact size depends on POM grade.
What should I check when choosing POM-C or POM-H for a bushing?
Select by load, temperature, contact medium and material-document requirements, and state the grade on the drawing or inquiry. POM-C and POM-H are not automatically equivalent, and material selection does not replace fit inspection.
What inspection reports can I get for turned POM bushings?
CMM or FAI reports can be supplied by order in the customer’s format, as can material identification. Roundness and height instruments check those features, while go/no-go or ring gauges check threads. Specify report and full-inspection scope during inquiry.
Can one turned prototype be followed by a production order?
Yes. MOQ is one piece. Prototypes typically take 3-7 days and production 10-15 days, depending on complexity and quantity. Confirm the drawing revision, grade and batch inspection requirements after prototype approval.
Which dimensions and quantities are needed for a turning quote?
Provide dimensioned 2D drawings and available STEP, IGES, STP or DWG files, or a dimensioned PDF, plus grade, quantity, intended use and critical shaft and bore tolerances to define fit and inspection.
Request a CNC Machining Quote from XCM CNC
Send us your drawings. Our team will review the file and reply with a machining quote. MOQ: 1 piece, with competitive low-cost pricing.



