CNC machining workshop
Custom Precision Acetal (POM) CNC Milled Parts

Custom Precision Acetal (POM) CNC Milled Parts

Material: Acetal (POM) MOQ: 1 Piece Tolerance: +/-0.005 mm on precision features; +/-0.008 mm for locating holes Lead Time: 10-15 days, depending on part complexity and order quantity
Email: [email protected] | WhatsApp: +8618638951317

Overview

XCM CNC precision mills Acetal (POM) guide blocks, fixture locators, insulating seats, and pump and valve housing parts. We machine mounting faces, open pockets, slots and locating-hole patterns into the same part for sliding guidance and assembly location. Specified precision features can reach +/-0.005 mm size tolerance and locating holes +/-0.008 mm. POM-C or POM-H is selected for temperature, load and contact medium. MOQ is one piece. Typical lead time is 10-15 days, depending on complexity and quantity.

custom pom cnc milled parts

Key Capabilities

  • Materials: Acetal (POM), including POM-C and POM-H by specified grade
  • Tolerance: +/-0.005 mm on precision features; +/-0.008 mm for locating holes
  • Surface Finish: Machined mounting, contact and sliding faces; finish requirements depend on grade and function
  • GD&T: Hole-pattern position and mounting-face perpendicularity, referenced to drawing datums
  • Max Size: 3-axis milling travel 3000 x 1600 x 1400 mm; parts up to about 2600 mm long, depending on fixturing and setup
  • Surface Treatment: Machined finish with deburring and 0.1 mm sharp-edge breaking; other requirements by drawing review
  • Thread: Internal threads from M1.4 and external threads from M2.0; go/no-go gauge inspection
  • Precision Limit: 1.5 mm minimum plastic wall thickness, depending on wall height and clamping; R0.5 mm minimum inside corner with end mills

custom pom cnc milled parts

POM Mounting Faces and Locating Hole Patterns

POM guide blocks and bases can combine mounting faces, slots and locating holes in one milling plan, placing assembly datums directly on the part geometry. Specified precision features can reach +/-0.005 mm size tolerance and locating holes +/-0.008 mm. Mark datum faces and hole-pattern fit requirements on the drawing so we can plan machining and inspection.

Inside Radii and Pocket Depth in Milled POM

Inside corners of open pockets and slots follow the end-mill radius, with R0.5 mm as the minimum. For a 40 mm deep pocket, R1.0 mm or larger is recommended. A 4:1 pocket depth-to-width ratio is typical, or up to 5:1 with extended tooling; greater tool overhang increases vibration risk for walls and floors. Identify corners that must be cleared on the drawing, or redesign them with a radius.

POM Thin-Wall Plate Support and Clamping

The minimum plastic wall thickness capability is 1.5 mm for POM plates and side walls. Taller or longer unsupported walls need suitable support and clamping to prevent cutting and clamping forces from warping the part. For plates requiring mounting-face flatness, define the datum face and inspection method on the drawing.

Milled POM Guide Surfaces and Edge Quality

POM’s low friction and rigidity suit guide blocks and sliding supports. Specify chamfer or burr limits on sliding edges; sharp edges can be broken by 0.1 mm. State the finish required on guide contact faces separately. Select a grade using load, temperature and contact medium.

Specifications

Product Name Custom Precision Acetal CNC Milled Parts
Manufacturer XCM CNC
Factory Location Shenzhen, Guangdong, China
Quality System ISO 9001, ISO 13485, IATF 16949, GJB9001C
Machining Process CNC milling
Material Acetal (POM)
Material Grade POM-C or POM-H as specified on the drawing and verified against material documentation
Tolerance +/-0.005 mm on precision features; +/-0.008 mm for locating holes
Surface Treatment Machined finish, deburring and 0.1 mm edge breaking; contact-face finish by drawing specification
Application Conveyor guide blocks and slide rail seats, fixture locating blocks and bases, connector insulating locating seats, open pump-cavity covers and valve-seat support blocks
Key Features Milled planes, open cavities, slots, locating-hole patterns, and mounting datums for non-rotational parts
Critical QC Requirements Locating-hole size relative to datum faces, plate distortion, and burrs on sliding faces; inspection report, CMM, or FAI scope by order requirements
MOQ 1 Piece
Typical Lead Time 10-15 days, depending on part complexity and order quantity
Drawing Formats STEP, IGS, DWG, PDF, X_T

Applications

Conveyor guide blocks and slide-rail seats

Conveyor guide blocks and rail seats contact moving components directly. POM’s low friction and wear resistance can reduce guide-face wear. Milling creates long slots, mounting planes and fixing holes in the same part. Select material against travel, contact load and operating temperature.

Fixture locating blocks and bases

Locating blocks and fixture bases undergo repeated assembly and removal. Dimensionally stable, machinable POM suits these reusable locators. Milling places datum faces, steps and hole patterns in one part. Define locating holes and datum faces on the drawing.

Insulating connector locating seats

Connector locators and insulating supports use POM’s insulation and rigidity to support connectors and maintain their assembly positions. Milling forms open pockets, retention slots and holes. Check electrical insulation and flame ratings against the specified grade’s material data.

Pump-cavity covers and valve-seat support blocks

Pump-cavity covers and valve-seat supports may contact water or oil. POM’s low water absorption helps maintain dimensions. Milling forms open pockets, sealing contact faces and fastening holes. Assess medium, cleaning and seal-face requirements for the actual application.

Why Choose Us

Quality systems and equipment

XCM CNC operates under ISO 9001, ISO 13485, IATF 16949 and GJB9001C quality systems, with DMG, Mazak, Matsuura and Brother machining equipment and CMM dimensional inspection. These support production and inspection of POM fixture blocks and guides.

Milling mounting faces, pockets and holes together

From small connector locators to larger fixture bases, we plan planes, open pockets, slots and locating holes around the part geometry. The 3-axis mill has 3000 x 1600 x 1400 mm travel and can handle parts about 2600 mm long depending on workholding. Multiple mounting features can be quoted from one drawing.

Equipment matched to precision, quality and cost

We select machines from tiers in mainland China, Taiwan, Japan, Europe and the United States according to the part and operation. Critical fixture-location dimensions and general structural features receive proportionate machining resources.

Hole patterns checked against assembly datums

For POM locators and bases, we inspect locating-hole and mounting-face relationships against drawing datums. Critical-dimension, CMM or first article inspection (FAI) reports are available by order to verify assembly interfaces.

Traceable grade and confidential drawings

Material identification or SGS environmental reports can be supplied by order for parts such as connector locators; document type depends on material and industry requirements. An NDA can be signed for confidential fixture or equipment drawings.

FAQ

How are locating holes referenced to a milled POM mounting face?

Specify the mounting-face datum and locating-hole positional relationship on the drawing. We machine and inspect the hole group from that datum. Locating-hole size can reach +/-0.008 mm; acceptance follows the agreed fit and inspection requirements.

What inside radius should I specify for an Acetal pocket?

End-milled inside corners retain a tool radius, with R0.5 mm as the minimum. A pocket depth-to-width ratio of 4:1 is typical, or up to 5:1 with extended tooling. Deeper pockets generally need larger radii, assessed with tool overhang, vibration and surface requirements.

How does wall height affect a 1.5 mm POM wall?

A 1.5 mm plastic wall is a minimum capability reference. Wall height, support, part geometry and clamping affect the machining plan. Mark the thin wall and adjacent mounting-face requirements on the drawing for joint assessment.

How should burr limits be defined on sliding guide blocks?

Mark chamfer and deburring requirements on sliding edges, distinguishing guide contact faces from nonfunctional edges. We can break sharp edges by 0.1 mm and inspect residual burrs and edge condition where moving parts touch.

Should I specify POM-H or POM-C for a fixture block?

POM-H and POM-C are not automatically interchangeable. Choose by load, temperature, contact medium and material-document needs. Specify the grade or material requirements in the inquiry so we can quote accordingly.

How do inspection conditions affect a POM plate fit?

Post-machining acceptance uses drawing dimensions, datums and the agreed method. In-service fit also depends on temperature, load and contact; POM has low water absorption, but temperature still changes size. Identify critical mounting faces and hole patterns for inspection.

Can a one-piece fixture prototype lead to repeat production?

Yes. MOQ is one piece and prototypes typically take 3-7 days, depending on complexity and quantity. Production follows approval and uses the confirmed grade, drawing revision and critical inspection items.

What drawings are needed to quote pockets and hole patterns?

Provide dimensioned 2D drawings and a 3D file in STEP, IGES or STP, or DWG or dimensioned PDF, with grade, quantity, critical tolerances, datums and application requirements. These define milling features and inspection scope.

Certified Quality ISO 9001 | ISO 13485 | GJB9001C | IATF:16949 View Quality Control & Inspection Proof

Request a CNC Machining Quote from XCM CNC

Send us your drawings. Our team will review the file and reply with a machining quote. MOQ: 1 piece, with competitive low-cost pricing.

Contact Form Demo 2

STEP, IGS, STL, DWG, DXF, PDF, JPG or ZIP. Max. 50 MB. Multiple or large files? Email: [email protected]

You May Also Like