CNC machining workshop
Custom Acetal (POM) CNC Turning and Milling Parts

Custom Acetal (POM) CNC Turning and Milling Parts

Material: Acetal (POM) MOQ: 1 Piece Lead Time: 10-15 business days after drawing review
Email: [email protected] | WhatsApp: +8618638951317

Overview

Cylindrical Acetal (POM) fittings, valve spools and drive sleeves often combine turned diameters with side holes, flats or keyways that must be located relative to the axis. XCM CNC provides custom POM turning and milling, selecting a combined or sequenced route based on drawing datums, tool access and workholding. POM’s dimensional stability and low friction suit guides and moving fits when the grade matches temperature, load and medium. MOQ is one piece; typical lead time is 10-15 days, depending on complexity and quantity.

custom pom turning and milling parts

Key Capabilities

  • Materials: Acetal (POM), including POM-C and POM-H by specified grade
  • Tolerance: +/-0.005 mm on precision features; +/-0.008 mm for shaft diameters and locating-hole dimensions, subject to fit and inspection conditions
  • Surface Finish: Specify finish separately for turned diameters, milled faces, and functional surfaces
  • GD&T: Side-hole and flat positions referenced to the turning axis with defined datum; runout and positional acceptance by drawing and inspection plan
  • Max Size: Turning up to diameter 1200 mm conservative range; milling machine travel 3000 x 1600 x 1400 mm; combined-part size depends on geometry and setup
  • Surface Treatment: Machined finish and edge deburring; other requirements by material and drawing review
  • Thread: Internal threads from M1.4 and external threads from M2.0; size, depth, and gauge inspection by drawing review
  • Precision Limit: Turned axis and milled side features coordinated to drawing datums; route and inspection depend on geometry and setup

custom pom turning and milling parts

POM Turned Axis and Side-Hole Position

A turned outside diameter provides the axis datum for radial features such as side holes in Acetal fittings and valve parts. Shaft and locating-hole sizes can reach +/-0.008 mm. Side-hole position relative to the axis must be specified on the drawing and checked from its datum.

Acetal Wrench Flats and Keyway Orientation

Milling wrench flats, slots or keyways on a POM cylinder creates orientation features needed for assembly. Specify their angular relationship to the axis or a datum face. A turn-mill machine or sequenced operations can be selected according to access and workholding.

POM Cross-Hole Exits, Threads, and Burr Control

Define deburring and sharp-edge requirements at cross-hole exits and threaded ends so residual material does not affect flow or fit. Thread size, effective depth and gauging depend on grade and feature. Specify roughness, burr and fit requirements separately for flow passages, mating faces and other functional surfaces.

Acetal Turn-Mill Routing and Datum Transfer

A Mazak i-100S turn-mill center can machine rotary faces, side holes and flats; route selection follows geometry and clamping. If multiple setups are required, define shared datums and inspection on the drawing to connect the turned axis, lateral features and mating surfaces.

Specifications

Product Name Custom Acetal CNC Turning and Milling Parts
Manufacturer XCM CNC
Factory Location Shenzhen, Guangdong, China
Quality System ISO 9001, ISO 13485, IATF 16949, GJB9001C
Machining Process CNC turning and milling; combined or sequenced operations by drawing review
Material Acetal (POM)
Material Grade POM-H or POM-C as specified for the fit and service medium; verify material documentation
Surface Treatment Machined finish and edge deburring; specify finish separately for mating diameters, milled flats, and cross-holes
Application Cylindrical valve cores and connectors with radial holes, drive sleeves with flats and keyways, insulating posts with side slots, pump and valve parts with mounting ears or side holes
Key Features Turned cylindrical bodies combined with side holes, flats, or keyways referenced to the part axis
Critical QC Requirements Shaft and locating-hole dimensions, side-hole or flat position relative to the axis, intersecting-hole burrs, and datum transfer between setups; report scope by order requirements
MOQ 1 Piece
Typical Lead Time 10-15 business days after drawing review
Drawing Formats STEP, IGS, DWG, PDF, X_T

Applications

Valve spools and fittings with radial holes

Typical parts: Cylindrical valve spool, fluid fitting

POM’s low friction suits sliding valve-spool fits. Turning establishes the outside diameter and axis, then milling adds a radial through-hole or wrench flat. Specify medium, pressure, sealing and cleaning against the drawing.

Drive sleeves with anti-rotation features

Typical parts: Drive coupling sleeve, keyed coupling sleeve

Rigidity and dimensional stability suit connectors that must retain their assembly relationship. Turn the mating cylinder, then mill a flat or keyway and specify its angular position relative to the axis.

Insulating connector posts with side slots

Typical parts: Insulating connector post, side-slotted locator

POM can support and locate connected components when the specified grade meets electrical requirements. Turning and milling coordinate the post diameter, axial hole and side slot. Check electrical and flame ratings against the material data.

Pump and valve parts with mounting lugs

Typical parts: Pump-valve spool, cylindrical part with mounting lug

Parts combining a mating diameter with a lateral mount can have the axis, lug or side hole planned in one turn-mill route. Assess oil, temperature and complete-equipment requirements against the drawing.

Why Choose Us

Quality systems and equipment

XCM CNC operates under ISO 9001, ISO 13485, IATF 16949 and GJB9001C quality systems, with DMG, Mazak, Matsuura and Brother machines and dimensional inspection equipment for POM rotary and side features.

Turning and milling around the axis and lateral features

From small connectors to larger combined parts, we coordinate diameters, axial bores, side holes, wrench flats, keyways and threads. Combined or sequenced operations are chosen by geometry, clamping and drawing requirements.

Equipment matched to precision, quality and cost

We select equipment from mainland China, Taiwan, Japan, Europe and the United States by part and operation precision. Critical shaft diameters and side-hole positions receive resources appropriate to their requirements, separate from general features.

Side holes and flats verified against the axis

For cylindrical fittings and valve spools, define side-hole, flat and keyway relationships to the axis on the drawing. Inspection planned from that datum verifies lateral mounting positions and orientation.

Operation handoffs defined before quoting and production

Turning, milling and threading can be reviewed from the same inquiry. For multiple setups, we agree on datum transfer and inspection. An NDA is available by request before confidential connector drawings are shared.

FAQ

When should an Acetal part combine turning with milling?

When a part combines a rotary outside diameter and axial bore with side holes, flats or keyways, assess turn-mill or sequenced operations together. Route selection follows feature location, tool access and clamping; define common datums on the drawing.

Can side holes share a datum with a POM turned diameter?

Yes. Define side-hole position against the chosen axis datum, then plan machining and inspection from it. Hole diameter and position relative to the axis are separate drawing requirements.

How should a wrench flat be aligned to a turned POM body?

Specify the wrench flat’s angular relationship to the rotary axis or a datum face. Inspection should reflect the real assembly orientation rather than flat width alone.

Can a turned and milled connector be completed in one setup?

Setup count depends on geometry, machine access and workholding. We choose combined or sequenced operations from the drawing, with datum transfer and inspection defined for any features made in later setups.

How should burrs be controlled at cross-hole exits?

Mark deburring and cleaning requirements at cross-hole exits, flow passages and edges adjoining threads. Inspection should cover the locations that affect fit, flow or assembly.

Which material grade should I choose for a POM connector?

Choose the grade for load, temperature, contact medium and electrical needs. Provide material specifications for insulation or flame requirements. POM-C and POM-H are not treated as automatically equivalent; verify the specified grade and material documents.

Can an NDA be arranged for a custom connector design?

Yes, an NDA can be arranged on request. State confidentiality needs and provide drawings, grade, quantity and critical dimensions needed for the quote.

What information is needed to quote turn-milled POM parts?

Provide dimensioned 2D drawings and available STEP, IGES or STP models. Mark axis datums, side-hole or flat relationships, grade, quantity and acceptance requirements so we can review routing and inspection.

Certified Quality ISO 9001 | ISO 13485 | GJB9001C | IATF:16949 View Quality Control & Inspection Proof

Request a CNC Machining Quote from XCM CNC

Send us your drawings. Our team will review the file and reply with a machining quote. MOQ: 1 piece, with competitive low-cost pricing.

Contact Form Demo 2

STEP, IGS, STL, DWG, DXF, PDF, JPG or ZIP. Max. 50 MB. Multiple or large files? Email: [email protected]

You May Also Like