CNC machining workshop
Custom Precision Nylon (PA) CNC Turned Parts

Custom Precision Nylon (PA) CNC Turned Parts

Material: Nylon (PA) MOQ: 1 Piece Tolerance: +/-0.005 mm on precision features of parts under 100 mm; +/-0.008 mm on shaft diameters and locating holes Lead Time: 10-15 business days after drawing review
Email: [email protected] | WhatsApp: +8618638951317

Overview

The assembly of nylon bushings, sleeves and rollers depends on the fit relationships between bores, outside diameters and end-face shoulders. XCM CNC provides Nylon (PA) CNC turning services, using PA’s wear resistance, self-lubricating properties and toughness to offer lightweight, low-noise alternatives for sliding-contact and rolling guide components. Orders start at one piece. Prototypes typically take 3-7 days, and standard lead times are typically 10-15 days, depending on part complexity and order quantity.

custom pa cnc turned parts

Key Capabilities

  • Materials: Nylon (PA), including PA6, PA66 and cast nylon grades; specify the grade for review
  • Tolerance: +/-0.005 mm on precision features of parts under 100 mm; +/-0.008 mm on shaft diameters and locating holes
  • Surface Finish: Turned outside diameters and bored surfaces; specify the required finish for drawing review
  • GD&T: Concentric and datum relationships for bores, outside diameters and end faces; CMM or roundness inspection as specified
  • Max Size: Turning capacity up to diameter 1250 x 2000 mm; PA setup depends on part geometry and clamping
  • Surface Treatment: Machined finish; other treatment by material and drawing review
  • Thread: Internal and external threads according to the drawing and selected PA grade
  • Precision Limit: Long PA shafts are planned by length-to-diameter ratio, support needs and inspection datums

custom pa cnc turned parts

PA Turned Bores, Diameters and Shoulders

CNC turning produces the bores, outside diameters and end-face shoulders required for PA bushings and rollers, allowing these surfaces to locate mating components during assembly. Dimensional tolerances can reach +/-0.008 mm on shaft diameters and locating holes, while critical dimensions on small precision parts under 100 mm can be controlled to +/-0.005 mm. Identify the fit dimensions and datums on your drawing.

PA Thin-Wall Sleeves and Clamping

The shape of a thin-wall PA sleeve is affected by its wall geometry and clamping condition, and may change after unclamping. Specify the sleeve wall thickness, datum end face and delivery inspection condition on the drawing so that machined dimensions can be checked against actual assembly requirements.

PA Long Shafts and Turning Support

Machining plans for slender PA shafts consider the length-to-diameter ratio and assess the need for a steady rest, follower rest or separate machining operations. Identify the shaft length, diameter and features requiring acceptance inspection on your drawing so that we can select the support method and arrange the corresponding measurements.

PA Sliding Fits and Diameter Inspection

Nylon’s wear resistance and self-lubricating properties suit sliding components such as bushings and guide rollers, while moisture absorption can affect operating clearance. CMM or roundness inspection of the relationships between bores, outside diameters and end faces, together with dimensional reports, can be arranged to order. Specify delivery dimensions, datums and actual operating humidity on the drawing so that delivery dimensions and operating clearances can be assessed separately.

Specifications

Product Name Custom Precision Nylon CNC Turned Parts
Manufacturer XCM CNC
Factory Location Shenzhen, Guangdong, China
Quality System ISO 9001, ISO 13485, IATF 16949, GJB9001C
Machining Process CNC turning of bores, outside diameters and end-face shoulders
Material Nylon (PA)
Material Grade PA6, PA66 or cast nylon; specify grade for review
Tolerance +/-0.005 mm on precision features of parts under 100 mm; +/-0.008 mm on shaft diameters and locating holes
Surface Treatment Machined finish; other treatment by material and drawing review
Application Bushings, sleeves, guide rollers and wear rollers
Key Features Turned bores, outside diameters, shoulders and sliding-contact surfaces
Critical QC Requirements Define fit datums and delivery inspection state; CMM or roundness inspection according to drawing and order requirements
MOQ 1 Piece
Typical Lead Time 10-15 business days after drawing review
Drawing Formats STEP, IGS, DWG, PDF, X_T

Applications

Wear Bushings and Guide Sleeves for Industrial Automation

Typical parts: Wear bushings, guide sleeves

Bushings and guide sleeves provide sliding guidance between shafts and housings. PA’s wear resistance and self-lubricating properties suit repeated contact. Turning produces inside and outside diameters and end-face shoulders. Delivery dimensions and operating clearances after moisture absorption should be considered separately in relation to the operating environment.

Rollers and Guide Wheels for Conveyor Systems

Typical parts: Conveyor rollers, guide wheels

Rollers support or guide conveyor belts and workpieces. PA helps reduce moving-component weight and contact noise, while its wear resistance suits repeated rolling contact. Turning produces rims, shaft bores and end faces. Material selection should consider load, speed and operating environment.

Insulating Standoffs and Spacer Rings for Electronic Equipment

Typical parts: Insulating standoffs, spacer rings

Standoffs and spacer rings maintain spacing between components and provide mechanical support. PA’s toughness and properties as an insulating material can guide initial material selection. Turning suits shoulders, bores and end faces. Dielectric and flame-retardancy requirements must be defined by the specific grade and project specifications.

Yarn Guide Rollers for Textile Machinery

Typical parts: Yarn guide rollers, yarn guide rings

Yarn guide rollers and rings guide yarn through machinery. PA’s wear resistance and low-friction properties help reduce wear from continuous contact. Turning produces profiles and center bores. Surface and edge requirements should reflect the yarn contact conditions, and antistatic requirements call for a corresponding material grade.

Why Choose Us

Quality Systems, Machining and Inspection Equipment

XCM CNC has ISO 9001, ISO 13485, IATF 16949 and GJB9001C quality systems, with DMG, Mazak, Matsuura and Brother machining equipment and Hexagon inspection equipment.

Turned Cylindrical Features and Supporting Inspection

We turn bores, outside diameters, grooves and end-face shoulders on PA bushings to drawing, with threading and sharp-edge removal as supporting operations. Inspection is planned around the fit datums of the shaft, housing and bushing.

Equipment Matched to Precision, Quality and Cost Requirements

We match equipment from mainland China, Taiwan, Japan, Europe and the United States to the precision required at each PA sleeve machining stage, selecting suitable resources for different sizes and cylindrical features.

Reports Based on Bushing Fit Datums

Critical-dimension, CMM or roundness inspection reports can be supplied to order. Inside and outside diameters and end-face datums are checked against the drawing to help you assess how a replacement bushing fits the shaft and housing.

Material Certificates for Grade Traceability

Material certificates can be supplied to order to help you verify the supplied PA6, PA66 or cast nylon material. Batch production is arranged after sample approval.

FAQ

How should I specify clearance for a nylon bushing?

Specify the bore, shaft diameter and fit datums for delivery inspection separately, and state the operating humidity, as moisture absorption in PA affects operating clearance. We can check delivery dimensions against your drawing, while operating clearance should be determined from the grade and application conditions.

What affects the roundness of a thin-wall nylon sleeve after unclamping?

Sleeve wall thickness, PA grade and clamping method all affect the shape after unclamping. Identify the wall thickness, datums and inspection condition on the drawing so that turning and dimensional checks can be planned around the geometry.

What support is considered for a long nylon shaft?

The length-to-diameter ratio affects support and turning arrangements for slender PA shafts. We assess steady rests, follower rests or separate operations based on part length and diameter. Include the full length, diameter and critical datums in your inquiry.

What diameter tolerance can you hold on turned PA parts?

Dimensional tolerances can reach +/-0.008 mm on PA shaft diameters and mating outside diameters. Critical dimensions on small precision parts under 100 mm can be controlled to +/-0.005 mm. Identify the mating component for each relevant dimension and the delivery inspection condition.

How should I specify the surface of a turned nylon bushing?

Specify the contact function and surface requirements for the bore and outside diameter separately on your drawing. Critical surfaces can be checked with a surface roughness tester. Surface targets for PA depend on the specific grade, machined surface and fit conditions.

Can you provide material certificates for nylon bushings?

Material certificates can be supplied to order. State the PA grade or material documentation you need to verify when submitting your inquiry. Provide STEP, IGES, STP, DWG or a dimensioned PDF, together with quantity, tolerances and application requirements. Orders start at one piece.

How long does a nylon turning prototype usually take?

PA turning prototypes typically take 3-7 days, and standard lead times are typically 10-15 days, depending on part complexity and order quantity. Batch production is arranged after sample approval.

Certified Quality ISO 9001 | ISO 13485 | GJB9001C | IATF:16949 View Quality Control & Inspection Proof

Request a CNC Machining Quote from XCM CNC

Send us your drawings. Our team will review the file and reply with a machining quote. MOQ: 1 piece, with competitive low-cost pricing.

Contact Form Demo 2

STEP, IGS, STL, DWG, DXF, PDF, JPG or ZIP. Max. 50 MB. Multiple or large files? Email: [email protected]

You May Also Like